ESP32Tiny
adirock09·ESP32Tiny·ESP32/PCB/esp32.kicad_pcb
About the ESP32Tiny PCB
ESP32Tiny is an open source ESP32 PCB design by adirock09, published on GitHub. It is a 2-layer board measuring 36.1 × 68.9 mm, with 73 components from 37 distinct parts.
Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the W25Q128JVS, MCP73831-2-OT and AMS1117-3.3. By type, the board carries 28 capacitors, 22 resistors, 4 ICs, 4 connectors, 4 diodes and 3 inductors.
It belongs with the power & battery designs in this gallery.
From the project
Used for both power input and firmware flashing
Used for both power input and firmware flashing
Integrated charger IC with status indicators
Supports single-cell Li-Ion/LiPo batteries
- Estimated Total Cost ( PCB ASSEMBLY + Shipping): $47.83 USD
Main components on the ESP32Tiny
ESP32Tiny bill of materials (BOM)
73 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3 | QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm | U1 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | MCP73831-2-OT | SOT-23-5 | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | 32.768 kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 40MHz(10ppm) | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y2 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1 |
| 1 | Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J2 |
| 2 | Conn_01x18_Pin | PinHeader_1x18_P2.54mm_Vertical | J3, J5 |
| 1 | Antenna | Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | BTN | SW_Push_1P1T_XKB_TS-1187A | BTN1 |
| 1 | 15pF | C_0402_1005Metric | DNP1 |
| 1 | Flash | SW_Push_1P1T_XKB_TS-1187A | Flash1 |
| 1 | Reset | SW_Push_1P1T_XKB_TS-1187A | Reset1 |
| 3 | LED | LED_0603_1608Metric | D1, D2, D3 |
| 1 | SS14 | D_SMA | D4 |
| 1 | 2nH | L_0402_1005Metric | L3 |
| 1 | DNP | L_0402_1005Metric | L5 |
| 1 | 4.7nH | L_0402_1005Metric | L6 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | 10uF | C_0402_1005Metric | C2, C3, C6, C7, C8, C16, C17, C20 +2 |
| 4 | 12pF | C_0402_1005Metric | C4, C33, C37, C38 |
| 8 | 0.1uF | C_0402_1005Metric | C10, C11, C15, C18, C19, C22, C32, C35 |
| 3 | 1uF | C_0402_1005Metric | C13, C26, C39 |
| 1 | DNP | C_0402_1005Metric | C14 |
| 1 | 15pF | C_0402_1005Metric | C31 |
| 1 | 10nF | C_0402_1005Metric | C40 |
| 1 | 2K | R_0402_1005Metric | R1 |
| 2 | 33R | R_0402_1005Metric | R2, R18 |
| 3 | 10K | R_0402_1005Metric | R4, R21, R22 |
| 2 | 200K | R_0402_1005Metric | R12, R19 |
| 2 | 5.1K | R_0402_1005Metric | R14, R17 |
| 1 | 1K | R_0402_1005Metric | R15 |
| 3 | 470R | R_0402_1005Metric | R16, R24, R25 |
| 1 | 100K | R_0402_1005Metric | R20 |
| 6 | 0R | R_0402_1005Metric | R23, R26, R27, R28, R29, R30 |
| 1 | DNP | R_0402_1005Metric | R31 |
ESP32Tiny design files
The KiCad project lives in the adirock09/ESP32Tiny repository on GitHub; these links point at the commit this page was built from.
- LayoutESP32/PCB/esp32.kicad_pcb
- SchematicESP32/PCB/esp32.kicad_sch
ESP32Tiny: common questions
What microcontroller does the ESP32Tiny use?
The ESP32Tiny is built around the ESP32-S3, from the ESP32 family.
How big is the ESP32Tiny PCB?
The ESP32Tiny measures 36.1 × 68.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32Tiny?
73 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32Tiny design files?
From the adirock09/ESP32Tiny repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32Tiny design in my own project?
The repository has no license, so all rights stay with adirock09. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32Tiny without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k