FlightWing

adirock09·FlightWing·FLIGHTWING/PCB/FlightWing.kicad_pcb

FlightWing PCB layout, top view — open source STM32 board by adirock09

About the FlightWing PCB

FlightWing is an open source STM32 PCB design by adirock09, published on GitHub. It is a 2-layer board measuring 40.8 × 46.2 mm, with 82 components from 39 distinct parts.

Its main chip is the STM32F722RETx, from the STM32 family. Other key parts include the BQ25883RGER, ICM-45686, BMP580, TPS63070RNMR and LMR51430. By type, the board carries 37 capacitors, 22 resistors, 6 ICs, 6 connectors, 4 inductors and 2 crystals.

It belongs with the power & battery, robotics & motion and sensors designs in this gallery.

From the project

- Based on STM32 Chip - 2-layer compact PCB - USB connection for programming and power - Onboard 3.3V and 5V voltage regulation - Compact footprint for small projects - IMU and Pressure Sensor - - ## Bill of Materials (BOM) | Serial Num | Description | Total (USD) | |----:|------

- Based on STM32 Chip - 2-layer compact PCB - USB connection for programming and power - Onboard 3.3V and 5V voltage regulation - Compact footprint for small projects - IMU and Pressure Sensor - - ## Bill of Materials (BOM) | Serial Num | Description | Total (USD) | |----:|--------------------------|-------------| | 1 | PCB and Assembly |77.86 | | 2 | Shipping JLCPCB |14.51 |

FlightWing, from the project README
From the project README

Main components on the FlightWing

FlightWing bill of materials (BOM)

82 components, 39 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BQ25883RGER
U1
1
ICM-45686
U2
1
STM32F722RETx
U3
1
BMP580
U4
1
TPS63070RNMR
U5
1
LMR51430
U6
1
X322525MOB4SI
X1
1
Q13FC1350000400
X2
1
Screw_Terminal_01x02
J1
4
Conn_01x03
J2, J3, J4, J7
1
Conn_01x06_Pin
J11
1
TF-01A
Card1
2
TS-1088-AR02016
SW1, SW2
1
TYPE-C 16PIN 2MD(073)
USB1
1
LED
D1
1
FCM1608KF-601T03
L4
1
DFE252012F-1R0M=P2
L5
1
XFL4020-152MEC
L6
1
YHNR3015-5R6M
L7
4
1uF
C1, C28, C29, C30
Show 19 more
QtyPartRefs
3
10uF
C2, C9, C12
3
10uF
C3, C5, C31
1
47nF
C4
1
44uF
C6
2
10uF
C7, C8
3
22uF
C10, C11, C13
12
100nF
C14, C15, C19, C20, C21, C22, C23, C24 +4
1
2.2uF
C16
2
22uF
C17, C18
1
2.2uF
C32
2
20pF
C33, C34
2
6.8pF
C35, C36
2
5.1K
R1, R2
1
383
R3
1
5.23K
R4
1
30.1K
R5
15
10K
R6, R7, R8, R9, R10, R11, R12, R13 +7
1
100K
R14
1
22.1K
R15

FlightWing design files

The KiCad project lives in the adirock09/FlightWing repository on GitHub; these links point at the commit this page was built from.

FlightWing: common questions

What microcontroller does the FlightWing use?

The FlightWing is built around the STM32F722RETx, from the STM32 family.

How big is the FlightWing PCB?

The FlightWing measures 40.8 × 46.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FlightWing?

82 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FlightWing design files?

From the adirock09/FlightWing repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the FlightWing design in my own project?

The repository has no license, so all rights stay with adirock09. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FlightWing without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards