25 open source boards using the BMP580
Real designs built with the BMP580, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Simpleflightcontroller
notaroomba
40 × 46 mm79 parts2LNo license19STM32
Cyberboard
notaroomba
51 × 21 mm64 parts4LNo license17STM32
Sabre-Integrated flight controller
CircuitGuy943
60 × 137.1 mm260 parts4LGPL-3.02STM32
GRAVITAS
GoTouchGra55
60 × 84.3 mm111 parts4LMIT1STM32
Flighty
diaxxu
68.2 × 77 mm86 parts2LNo license1STM32
STM32-FlightController
premvy
40 × 44.8 mm79 parts2LMIT1STM32
Polaris
nsreeni07
40 × 44.8 mm79 parts2LMIT1Airgrep
mp911de
105 × 95 mm175 parts4LNo license0STM32
Flight-Controller for rockets
epicgamer720
40 × 52.5 mm101 parts2LNo license0STM32
Boreas
darshg321
50 × 50 mm92 parts2LNo license0STM32
Horizon
ChladpavPy
38.4 × 82.8 mm92 parts4LNo license0STM32
NSSFC
Keyaan-07
37 × 37 mm88 parts4LNo license0STM32
FlightX
Shubhkr08
40.8 × 46.2 mm85 parts2LNo license0STM32
FlightWing
adirock09
40.8 × 46.2 mm82 parts2LNo license0STM32
FlightController
Acidicts
46 × 42.7 mm79 parts2LNo license0STM32
Flighttt-Controller
juanfierro4892
52.5 × 58.1 mm79 parts2LNo license0STM32
Flight-Controller
Mithilessh2010
40 × 46 mm79 parts2LNo license0STM32
The-Flying-Charizard
sahilchess
50 × 56 mm79 parts2LNo license0STM32
Flight controller
GodOfStrategy
77.4 × 45.1 mm78 parts2LNo license0ESP32
Adapter board r2
picafe
68.4 × 33.4 mm51 parts4LNo license0ESP32
Air quality sensor station
AcquaV
65 × 45 mm38 parts4LCC-BY-4.00STM32
Cyberboard Panel
notaroomba
51 × 44 mm64 parts4LNo license17STM32
Stigma core board
tudsat-rocket
40 × 40 mm85 parts4LNo license0Minuet Environment Sensor
brown-studios
25 × 25 mm10 parts4LMIT65Sensor stick
AirMQ
28 × 6.6 mm11 parts2LCERN-OHL-P-2.02
How designs wire the BMP580
Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the BMP580 connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a decoupling capacitor on 22 of 24 designs, most often 100 nF (then 10 µF).
- The VDD pin has a decoupling capacitor on 22 of 24 designs, most often 100 nF (then 10 µF).
- The SCK pin has a pull-up to 3.3V on 20 of 24 designs, most often 10 kΩ (then 4.7 kΩ).
- The SDI pin has a pull-up to 3.3V on 20 of 24 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDIOpin 1 | Connected to: 3.3V 96% |
|
| SCKpin 2 | Connected to: The microcontroller 79%, BQ25883RGER 50% |
|
| VSSpin 3, 8, 9 | Connected to: GND 100% | — |
| SDIpin 4 | Connected to: The microcontroller 79%, BQ25883RGER 50% |
|
| SDOpin 5 | Connected to: GND 63% · a signal 21% | — |
| VDDpin 10 | Connected to: 3.3V 96% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Minuet Environment Sensor by brown-studios, Simpleflightcontroller by notaroomba, Cyberboard by notaroomba and Sensor stick by AirMQ.
The BMP580 in open source designs
The gallery holds 25 open source boards using the BMP580 from 24 GitHub repositories; a typical one measures about 46 × 46 mm and carries around 79 components.
56% are two-layer designs, the rest use four layers or more, and 28% carry an open source license.
The most starred is Minuet Environment Sensor by brown-studios.
Parts used alongside the BMP580
What boards using the BMP580 are built for
BMP580: common questions
Where can I find a BMP580 reference design?
Each of the 25 boards on this page is a real design using the BMP580. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the BMP580 VDDIO pin?
The VDDIO pin has a decoupling capacitor on 22 of 24 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 24 open source designs using the BMP580.
What decoupling capacitors do designs use on the BMP580 VDD pin?
The VDD pin has a decoupling capacitor on 22 of 24 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 24 open source designs using the BMP580.
What pull-up resistor is used on the BMP580 SCK pin?
The SCK pin has a pull-up to 3.3V on 20 of 24 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 24 open source designs using the BMP580.
What parts are used alongside the BMP580?
The BQ25883RGER, ICM-45686, TPS63070RNMR, LMR51430 and STM32F722RETX appear in the most repositories here.
Which microcontrollers do boards using the BMP580 use?
Most are built on STM32 (20) and ESP32 (2).
How big is a typical board using the BMP580?
The median is 46 × 46 mm, and 56% are two-layer designs.
What is the most popular open source board using the BMP580?
By GitHub stars, Minuet Environment Sensor by brown-studios, with 65 stars.
Can I simulate one of these boards using the BMP580 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.