22 open source boards using the BQ25883RGER
Real designs built with the BQ25883RGER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Mainboard
pycubed
90.2 × 95.9 mm196 parts2LNo license97STM32
Simpleflightcontroller
notaroomba
40 × 46 mm79 parts2LNo license19Microchip SAM
Mainboard before drastic
Sierra-Lobo
90.2 × 101.1 mm353 parts6LCC-BY-SA-4.01Microchip SAM
Mainboard
alxklso
90.2 × 95.9 mm196 parts4LMIT1STM32
Flighty
diaxxu
68.2 × 77 mm86 parts2LNo license1STM32
STM32-FlightController
premvy
40 × 44.8 mm79 parts2LMIT1STM32
Polaris
nsreeni07
40 × 44.8 mm79 parts2LMIT1RP2040/RP2350
Sol-Mk.-I
HIIACODER
78.2 × 46.8 mm72 parts4LMIT1Microchip SAM
Mainboard
stanford-ssi
90.2 × 95.9 mm248 parts2LNo license0STM32
Flight-Controller for rockets
epicgamer720
40 × 52.5 mm101 parts2LNo license0STM32
Boreas
darshg321
50 × 50 mm92 parts2LNo license0STM32
FlightX
Shubhkr08
40.8 × 46.2 mm85 parts2LNo license0STM32
FlightWing
adirock09
40.8 × 46.2 mm82 parts2LNo license0STM32
FlightController
Acidicts
46 × 42.7 mm79 parts2LNo license0STM32
Flighttt-Controller
juanfierro4892
52.5 × 58.1 mm79 parts2LNo license0STM32
The-Flying-Charizard
sahilchess
50 × 56 mm79 parts2LNo license0STM32
Flight-Controller
Mithilessh2010
40 × 46 mm79 parts2LNo license0STM32
Flight controller
GodOfStrategy
77.4 × 45.1 mm78 parts2LNo license0RP2040/RP2350
PiCubed
stanford-ssi
90.2 × 95.9 mm176 parts4LNo license13Microchip SAM
Mainboard
Sierra-Lobo
90.2 × 101.1 mm312 parts6LCC-BY-SA-4.01RP2040/RP2350
Mainboard
pete4radio
90.2 × 95.9 mm175 parts4LNo license0- schematic only · 61 partsRaspberry Pi
System
stanford-ssi
61 parts2LNo license13
How designs wire the BQ25883RGER
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the BQ25883RGER connects to, and the resistors, capacitors and other passives placed on it.
- The BTST pin has a series capacitor on 19 of 20 designs, most often 47 nF (then 47 µF).
- The SW pins have a series capacitor on 19 of 20 designs, most often 47 nF (then 47 µF).
- The SW pins have a inductor on 19 of 20 designs, most often 1 µH.
- The PMID pins have a inductor on 19 of 20 designs, most often 1 µH.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| D-pin 1 | Connected to: Not connected 65% · a signal 30% | — |
| SDApin 4 | Connected to: The microcontroller 65%, BMP580 55%, ADM1176-1ARMZ-R7 20% |
|
| SCLpin 5 | Connected to: The microcontroller 65%, BMP580 55%, ADM1176-1ARMZ-R7 20% |
|
| INTpin 6 | Connected to: The microcontroller 60% · not connected 35% |
|
| TSpin 7 | Connected to: Signal 100% |
|
| ILIMpin 8 | Connected to: Signal 95% |
|
| PGpin 9 | Connected to: Signal 65% · not connected 35% |
|
| NCpin 10 | Connected to: Not connected 100% | — |
| REGNpin 11 | Connected to: VREGN 60% · a signal 35% |
|
| BTSTpin 12 | Connected to: Signal 95% |
|
| BATpin 13, 14 | Connected to: BAT+ 60% · a signal 40% |
|
| SYSpin 15, 16 | Connected to: VSYS 68% · a signal 28% | — |
| SWpin 17, 18 | Connected to: Signal 95% |
|
| GNDpin 19, 20 | Connected to: GND 90% | — |
| PMIDpin 21, 22 | Connected to: Signal 100% |
|
| VBUSpin 23 | Connected to: VBUS 95% |
|
| D+pin 24 | Connected to: Not connected 65% · a signal 35% | — |
| EPpin 25 | Connected to: GND 85% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mainboard by pycubed, Simpleflightcontroller by notaroomba, PiCubed by stanford-ssi and Mainboard by alxklso.
The BQ25883RGER in open source designs
The gallery holds 22 open source boards using the BQ25883RGER from 20 GitHub repositories; a typical one measures about 52.5 × 52.5 mm and carries around 84 components.
73% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is Mainboard by pycubed.
Parts used alongside the BQ25883RGER
Microcontrollers on boards using the BQ25883RGER
What boards using the BQ25883RGER are built for
BQ25883RGER: common questions
Where can I find a BQ25883RGER reference design?
Each of the 22 boards on this page is a real design using the BQ25883RGER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BQ25883RGER BTST pin connected?
The BTST pin has a series capacitor on 19 of 20 designs, most often 47 nF (then 47 µF). Counted from the KiCad layouts of 20 open source designs using the BQ25883RGER.
How is the BQ25883RGER SW pin connected?
The SW pins have a series capacitor on 19 of 20 designs, most often 47 nF (then 47 µF). Counted from the KiCad layouts of 20 open source designs using the BQ25883RGER.
How is the BQ25883RGER PMID pin connected?
The PMID pins have a inductor on 19 of 20 designs, most often 1 µH. Counted from the KiCad layouts of 20 open source designs using the BQ25883RGER.
What parts are used alongside the BQ25883RGER?
The BMP580, ICM-45686, TPS63070RNMR, LMR51430 and STM32F722RETX appear in the most repositories here.
Which microcontrollers do boards using the BQ25883RGER use?
Most are built on STM32 (13), Microchip SAM (5), RP2040/RP2350 (3) and Raspberry Pi (1).
How big is a typical board using the BQ25883RGER?
The median is 52.5 × 52.5 mm, and 73% are two-layer designs.
What is the most popular open source board using the BQ25883RGER?
By GitHub stars, Mainboard by pycubed, with 97 stars.
Can I simulate one of these boards using the BQ25883RGER before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.