VVVF-Invertor-Controller
adirock09·VVVF-Invertor-Controller·3PhaseVVVF InverterController/PCB/InverterController.kicad_pcb
About the VVVF-Invertor-Controller PCB
VVVF-Invertor-Controller is an open source STM32 PCB design by adirock09, published on GitHub. It is a 2-layer board measuring 56.8 × 67.3 mm, with 96 components from 32 distinct parts.
Its main chip is the STM32F103RBT6, from the STM32 family. Other key parts include the XC6206P332MR, LM2901, NC7SZ10P6X, TDA2822D and SN65HVD230. By type, the board carries 46 capacitors, 35 resistors, 7 ICs, 3 inductors, 2 LEDs and 2 diodes.
From the project
- ## Bill of Materials (BOM) | Serial Num | Description | Total (USD) | |----:|--------------------------|-------------| | 1 | PCB and Assembly |86.51 | | 2 | Shipping JLCPCB |12.09 |
- ## Bill of Materials (BOM) | Serial Num | Description | Total (USD) | |----:|--------------------------|-------------| | 1 | PCB and Assembly |86.51 | | 2 | Shipping JLCPCB |12.09 |
- Estimated Total Cost ( PCB ASSEMBLY + Shipping): $98.60 USD
Main components on the VVVF-Invertor-Controller
VVVF-Invertor-Controller bill of materials (BOM)
96 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6206P332MR | SOT-23 | IC1 |
| 1 | LM2901 | SOIC-14_3.9x8.7mm_P1.27mm | IC2 |
| 1 | NC7SZ10P6X | SOT-363_SC-70-6 | IC3 |
| 1 | STM32F103RBT6 | LQFP-64_10x10mm_P0.5mm | IC4 |
| 1 | TDA2822D | SOIC-8_3.9x4.9mm_P1.27mm | IC5 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | IC6 |
| 1 | RT8259GE | SOT-23-6 | IC7 |
| 1 | 8MHZ 8MHz | Crystal_SMD_TXC_7A-2Pin_5x3.2mm | Q1 |
| 2 | LED_0603_GN | LED_0805_2012Metric | ALIVE0, PWR0 |
| 2 | 1N5819WS | D_SOD-323 | D1, D2 |
| 1 | C82314 4.7µH | L_1008_2520Metric | L1 |
| 1 | C68035 100µH | L_0805_2012Metric | L2 |
| 1 | C1046 10µH | L_0805_2012Metric | L3 |
| 6 | 22N 22n | C_0603_1608Metric | C1, C33, C34, C35, C36, C43 |
| 6 | C96446 10µ | C_0603_1608Metric | C2, C4, C6, C7, C26, C41 |
| 24 | C15849 1µ | C_0603_1608Metric | C3, C5, C8, C9, C10, C11, C12, C13 +16 |
| 2 | 20P 20p | C_0603_1608Metric | C22, C23 |
| 5 | 1NF 1nF | C_0603_1608Metric | C25, C31, C32, C44, C45 |
| 2 | 100N 100n | C_0603_1608Metric | C38, C46 |
| 1 | C16133 100µ | CP_EIA-3528-21_Kemet-B | C39 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 510 | R_0603_1608Metric | R1, R3, R6, R8, R11, R14, R21 |
| 1 | 100K 100k | R_0603_1608Metric | R2 |
| 1 | 51K 51k | R_0603_1608Metric | R4 |
| 9 | 10K 10k | R_0603_1608Metric | R5, R9, R10, R12, R13, R15, R18, R20 +1 |
| 1 | 220 | R_0603_1608Metric | R7 |
| 4 | 3K3 3k3 | R_0603_1608Metric | R16, R17, R23, R24 |
| 2 | 4R7 | R_0603_1608Metric | R19, R22 |
| 2 | 6K8 6k8 | R_0603_1608Metric | R25, R26 |
| 2 | 470 | R_Array_Convex_4x0603 | RN1, RN2 |
| 2 | 4K7 4k7 | R_Array_Convex_4x0603 | RN3, RN5 |
| 2 | 1K2 1k2 | R_Array_Convex_4x0603 | RN4, RN6 |
| 2 | 10K 10k | R_Array_Convex_4x0603 | RN7, RN8 |
VVVF-Invertor-Controller design files
The KiCad project lives in the adirock09/VVVF-Invertor-Controller repository on GitHub; these links point at the commit this page was built from.
VVVF-Invertor-Controller: common questions
What microcontroller does the VVVF-Invertor-Controller use?
The VVVF-Invertor-Controller is built around the STM32F103RBT6, from the STM32 family.
How big is the VVVF-Invertor-Controller PCB?
The VVVF-Invertor-Controller measures 56.8 × 67.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VVVF-Invertor-Controller?
96 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the VVVF-Invertor-Controller design files?
From the adirock09/VVVF-Invertor-Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the VVVF-Invertor-Controller design in my own project?
The repository has no license, so all rights stay with adirock09. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the VVVF-Invertor-Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k