4 open source boards using the TDA2822D

Real designs built with the TDA2822D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The TDA2822D in open source designs

The gallery holds 4 open source boards using the TDA2822D from 4 GitHub repositories; a typical one measures about 56.8 × 67.3 mm and carries around 96 components.

75% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Openinverter hw mainboard mini by llange.

Microcontrollers on boards using the TDA2822D

What boards using the TDA2822D are built for

TDA2822D: common questions

Where can I find a TDA2822D reference design?

Each of the 4 boards on this page is a real design using the TDA2822D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TDA2822D?

The LM2901, NC7SZ10P6X, RT8259GE, SN65HVD230 and STM32F103RBT6 appear in the most repositories here.

Which microcontrollers do boards using the TDA2822D use?

Most are built on STM32 (4).

How big is a typical board using the TDA2822D?

The median is 56.8 × 67.3 mm, and 75% are two-layer designs.

What is the most popular open source board using the TDA2822D?

By GitHub stars, Openinverter hw mainboard mini by llange, with 3 stars.

Can I simulate one of these boards using the TDA2822D before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part