5 open source boards using the RT8259GE

Real designs built with the RT8259GE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the RT8259GE

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the RT8259GE connects to, and the resistors, capacitors and other passives placed on it.

  • The BST pin has a series capacitor on 5 of 5 designs, most often 22 nF (then 10 nF).
  • The FB pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 19.6 kΩ).
  • The SW pin has a series capacitor on 5 of 5 designs, most often 22 nF (then 10 nF).
  • The SW pin has a inductor on 5 of 5 designs, most often 4.7 µH (then 33 µH).
BSTpin 1Connected to: Signal 100%
  • Series capacitor on 100% · 22 nF (3), 10 nF (2)
GNDpin 2Connected to: GND 100%
FBpin 3Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (3), 19.6 kΩ (2)
  • Pull-up to VCC on 80% · 51 kΩ (3), 62 kΩ (1)
ENpin 4Connected to: Signal 80% · 24V 20%
  • Series resistor on 60% · 100 kΩ (3)
INpin 5Connected to: Signal 80% · 24V 20%
  • Capacitor to GND on 80% · 10 µF (5), 1 µF (3)
  • Series resistor on 60% · 100 kΩ (3)
SWpin 6Connected to: Signal 100%
  • Series capacitor on 100% · 22 nF (3), 10 nF (2)
  • Inductor on 100% · 4.7 µH (4), 33 µH (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Openinverter hw mainboard mini by llange, VVVF-Invertor-Controller by adirock09, Project-LabAnalogDesign2 by Fescron and IMD Carrier by ManchesterStingerMotorsports.

The RT8259GE in open source designs

The gallery holds 5 open source boards using the RT8259GE from 5 GitHub repositories; a typical one measures about 56.8 × 67.3 mm and carries around 96 components.

100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Openinverter hw mainboard mini by llange.

Microcontrollers on boards using the RT8259GE

What boards using the RT8259GE are built for

RT8259GE: common questions

Where can I find a RT8259GE reference design?

Each of the 5 boards on this page is a real design using the RT8259GE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RT8259GE BST pin connected?

The BST pin has a series capacitor on 5 of 5 designs, most often 22 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the RT8259GE.

What resistor goes on the RT8259GE FB pin?

The FB pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 19.6 kΩ). Counted from the KiCad layouts of 5 open source designs using the RT8259GE.

How is the RT8259GE SW pin connected?

The SW pin has a series capacitor on 5 of 5 designs, most often 22 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the RT8259GE.

What parts are used alongside the RT8259GE?

The LM2901, NC7SZ10P6X, SN65HVD230, STM32F103RBT6 and TDA2822D appear in the most repositories here.

Which microcontrollers do boards using the RT8259GE use?

Most are built on STM32 (3).

How big is a typical board using the RT8259GE?

The median is 56.8 × 67.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the RT8259GE?

By GitHub stars, Openinverter hw mainboard mini by llange, with 3 stars.

Can I simulate one of these boards using the RT8259GE before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part