SmartGuard
AditiWattNow·SmartGuard·SmartGuard_v1/SmartGuard_v1.kicad_pcb
About the SmartGuard PCB
SmartGuard is an open source ESP32 PCB design by AditiWattNow, published on GitHub. It is a 2-layer board measuring 127.5 × 72 mm, with 25 components from 16 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the VL53L1CXV0FY1, RFM95W-868S2, TP4056-42-ESOP8 and AMS1117-3.3. By type, the board carries 7 resistors, 5 ICs, 5 capacitors, 4 connectors, 3 diodes and 1 antenna.
It belongs with the rf & radio, iot & wireless and sensors designs in this gallery.
From the project
AI-powered railway platform crowd crush prevention system
On February 15, 2025, a crowd crush at New Delhi Railway Station killed 18 people and injured 15 others — triggered by train delays creating dangerous platform overcrowding. Indian Railways subsequently identified 60 high-traffic stations requiring immediate crowd management upgrades.
Existing solutions react after dangerous density is reached. SmartGuard predicts breaches before they happen.
Main components on the SmartGuard
SmartGuard bill of materials (BOM)
25 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | VL53L1CXV0FY1 | PinHeader_1x06_P2.54mm_Vertical | U2 |
| 1 | RFM95W-868S2 | HOPERF_RFM9XW_SMD | U3 |
| 1 | TP4056-42-ESOP8 | PinHeader_1x04_P2.54mm_Vertical | U4 |
| 1 | AMS1117-3.3 | TO-220-3_Vertical | U5 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J4 |
| 1 | Antenna | SMA_Amphenol_132289_EdgeMount | AE1 |
| 3 | LED | LED_D5.0mm | D1, D2, D3 |
| 4 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C5 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 2 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 3 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R6, R7 |
| 1 | 1.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
SmartGuard design files
The KiCad project lives in the AditiWattNow/SmartGuard repository on GitHub; these links point at the commit this page was built from.
SmartGuard: common questions
What microcontroller does the SmartGuard use?
The SmartGuard is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the SmartGuard PCB?
The SmartGuard measures 127.5 × 72 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SmartGuard?
25 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the SmartGuard design files?
From the AditiWattNow/SmartGuard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SmartGuard design in my own project?
The repository has no license, so all rights stay with AditiWattNow. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SmartGuard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k