HardLabs

AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep

aeonSolutions·AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection-for-Better-Health-Sleep·KiCad/Window_EMP_monitor_59,4x23,5x1.6mm.kicad_pcb

AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep PCB layout, top view — open source ESP32 board by aeonSolutions

About the AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep PCB

AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep is an open source ESP32 PCB design by aeonSolutions, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 59.6 × 23.5 mm, with 57 components from 36 distinct parts.

Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the ADS1115, AHT20 and ATSHA204A-MAHDA-T. By type, the board carries 3 ICs, 1 connector, 1 antenna, 1 LED and 1 inductor.

From the project

Bed Sheet EMF Protection for Better Health & Sleep

Main components on the AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep

ADS1115AHT20ATSHA204A-MAHDA-T

AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep bill of materials (BOM)

57 components, 36 distinct parts.

QtyPartRefs
1
ADS1115
U1
1
AHT20
U3
1
ATSHA204A-MAHDA-T
U5
1
Conn_01x07_Socket
J2
1
AN9520
ANT1
4
100nF
ATC1, EC1, EC2, LSC1
1
AUR9718x_DFN_3x3mm_6_pin
AUR1
1
22uF
AUR_C1
1
4.7uF
AUR_C2
1
24k
AUR_R1
1
75k
AUR_R2
1
3.3uF
AUR_l1
1
Polyfuse
BAT_FUSE1
2
100k
BAT_SENSE_R1, BAT_SENSE_R2
4
ss12
DMPprobeSS12_2, probeSS12_1, probeSS12_3, probeSS12_4
1
1uF 10% 50V
EC3
2
10uF 20% 6.3V
EC4, EC7
2
2.7pF
EC5, EC9
5
100nF 10% 16V
EC6, EC8, EC10, EC11, EC13
4
22pF 5% 50V
EC12, EC14, EC15, EC17
Show 16 more
QtyPartRefs
1
32.768Mhz 22pF+-10PPM
ECY1
1
40Mhz 22pF+-10PPM
ECY2
1
1.8nH 5%
EL1
4
10k
ER1, ER3, I2C_SCL_R2, I2C_SDA_R2
1
499R
ER2
1
ESP32-S3
ESP32S1
1
LSM6DS3
IMU1
1
330R
LR1
1
10k
MTRR1
1
NPN
MTRT1
1
Screw_Terminal_01x02
PWR_PLUG1
1
Screw_Terminal_01x02
SHJ1
2
C
probeC1, probeC2
2
C_Polarized
probeC3, probeC4
1
LED_GBRC
LED1
1
12nH 5%
L1

AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep design files

The KiCad project lives in the aeonSolutions/AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection-for-Better-Health-Sleep repository on GitHub; these links point at the commit this page was built from.

AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep: common questions

What microcontroller does the AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep use?

The AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep is built around the ESP32-S3, from the ESP32 family.

How big is the AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep PCB?

The AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep measures 59.6 × 23.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep?

57 components, from 36 distinct parts. The full bill of materials is listed on this page.

Where can I download the AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep design files?

From the aeonSolutions/AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection-for-Better-Health-Sleep repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep design in my own project?

Yes, under the terms of its CC0-1.0 license, which aeonSolutions chose for the repository.

Can I test firmware for the AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards