HardLabs

Flipper esp32

agkaminski·hw_projects·flipperzero_esp/kicad/flipper_esp32.kicad_pcb

Flipper esp32 PCB layout, top view — open source ESP32 board by agkaminski

About the Flipper esp32 PCB

Flipper esp32 is an open source ESP32 PCB design by agkaminski, published on GitHub. It is a 2-layer board measuring 27.2 × 27.2 mm, with 11 components from 6 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. By type, the board carries 4 resistors, 2 transistors, 2 switches, 1 IC, 1 connector and 1 capacitor.

From the project

Various hardware projects that do not deserve their own repository.

Expansion module with ESP32 for Flipper Zero.

Adapts ESP flasher app to the changes in pinout I made.

Main components on the Flipper esp32

ESP32-WROOM-32

Flipper esp32 bill of materials (BOM)

11 components, 6 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32
U1
2
Q_NPN_BCE
Q1, Q2
1
Conn_01x10
J1
2
SW_MEC_5E
SW1, SW2
1
C
C1
4
R
R1, R2, R3, R4

Flipper esp32 design files

The KiCad project lives in the agkaminski/hw_projects repository on GitHub; these links point at the commit this page was built from.

Flipper esp32: common questions

What microcontroller does the Flipper esp32 use?

The Flipper esp32 is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the Flipper esp32 PCB?

The Flipper esp32 measures 27.2 × 27.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Flipper esp32?

11 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Flipper esp32 design files?

From the agkaminski/hw_projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Flipper esp32 design in my own project?

The repository has no license, so all rights stay with agkaminski. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Flipper esp32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in hw_projects

Similar boards