Arduino weatherstation

AGVOLUTION·arduino_weatherstation·hardware/V2.2.1/mkrfox1200.kicad_pcb

Arduino weatherstation PCB layout, top view — open source board by AGVOLUTION

About the Arduino weatherstation PCB

Arduino weatherstation is an open source PCB design by AGVOLUTION, published on GitHub. It is a 2-layer board measuring 125 × 85 mm, with 64 components from 31 distinct parts.

Other key parts include the 4051, LTC1983-5, MCP1642B-50, INA126 and BQ297xy. By type, the board carries 21 connectors, 17 capacitors, 12 resistors, 9 ICs, 3 transistors and 1 switch.

It belongs with the rf & radio, iot & wireless and sensors designs in this gallery.

From the project

Embedded software and hardware design for Arduino MKR-board based Weatherstation (Atmel SAMD processors).

We help you to install your own low-cost weatherstation. Connectivity and data storage, evaluation and -visualization is provided by us.

Required Arduino boards: * Arduino SAMD Boards (32-bits ARM Cortex M0+) (by Arduino), v1.8.11

Instructions 1. Clone the project 2. Open arduino_weatherstation.ino in Arduino IDE. Install the required library and board packages. 3. Build + Flash. 4. Done!

Arduino weatherstation, from the project README — From the project README

Main components on the Arduino weatherstation

4051 LTC1983-5 MCP1642B-50 INA126 BQ297xy ZLDO1117G33TA BME280

Arduino weatherstation bill of materials (BOM)

64 components, 31 distinct parts.

Qty	Part	Footprint	Refs
2	4051	SO-16_3.9x9.9mm_P1.27mm	U1, U2
1	LTC1983-5	TSOT-23-6	U3
1	MCP1642B-50	MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm	U4
2	INA126	MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm	U5, U6
1	BQ297xy	WSON-6_1.5x1.5mm_P0.5mm	U7
1	ZLDO1117G33TA	SOT-223-3_TabPin2	U8
1	BME280	Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering	U9
1	DMN65D8LDW	SOT-363_SC-70-6	Q1
2	DMN3115UDM	SOT-23-6	Q2, Q3
6	Conn_01x02_Male	Phoenix_19_84_96_3_1x02_P3.50mm_Vertical	J1, J5, J6, J8, J9, J10
2	Conn_01x14_Female	PinSocket_1x14_P2.54mm_Vertical	J2, J3
3	Conn_01x04_Male	Phoenix_19_84_98_9_1x04_P3.50mm_Vertical	J4, J12, J13
1	Conn_02x03_Odd_Even	IDC-Header_2x03_P2.54mm_Vertical	J7
1	Conn_01x03_Male	Phoenix_19_84_97_6_1x03_P3.50mm_Vertical	J11
1	Conn_01x04_Male	NS-Tech_Grove_1x04_P2mm_Vertical	J14
2	RJ14	RJ14_Wuerth_615004138421_Horizontal	J15, J16
2	Conn_01x05_Female	Phoenix_19_84_99_2_1x05_P3.50mm_Vertical	J17, J18
2	Conn_01x01_Female	BatteryClip_Keystone_54	J19, J20
1	Conn_01x02	Phoenix_19_84_96_3_1x02_P3.50mm_Vertical	J21
1	SW_Push	SW_SPST_PTS645	SW1

Show 11 more

Qty	Part	Footprint	Refs
1	4.7uH	L_0805_2012Metric	L1
15	100nF	C_0805_2012Metric	C1, C2, C3, C4, C5, C6, C7, C8 +7
2	4.7uF	C_0805_2012Metric	C15, C16
1	7.87k	R_0805_2012Metric	R3
1	10k	R_0805_2012Metric	R4
2	0	R_0805_2012Metric	R5, R6
2	150	R_0805_2012Metric	R7, R8
2	33k	R_0805_2012Metric	R9, R10
1	330	R_0805_2012Metric	R11
1	2k2	R_0805_2012Metric	R12
2	4.7M	R_0805_2012Metric	R13, R14

Arduino weatherstation design files

The KiCad project lives in the AGVOLUTION/arduino_weatherstation repository on GitHub; these links point at the commit this page was built from.

Layouthardware/V2.2.1/mkrfox1200.kicad_pcb

Arduino weatherstation: common questions

How big is the Arduino weatherstation PCB?

The Arduino weatherstation measures 125 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino weatherstation?

64 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arduino weatherstation design files?

From the AGVOLUTION/arduino_weatherstation repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Arduino weatherstation design in my own project?

The repository has no license, so all rights stay with AGVOLUTION. Use it as a reference, and ask the author before reusing the design.

Similar boards