HardLabs

Rp2350a tempel

ahsanu123·crumbs·rp2350a-tempel/rp2350a-tempel.kicad_pcb

Rp2350a tempel PCB layout, top view — open source RP2040/RP2350 board by ahsanu123

About the Rp2350a tempel PCB

Rp2350a tempel is an open source RP2040/RP2350 PCB design by ahsanu123, published on GitHub under the MIT license. It is a 2-layer board measuring 38.5 × 41.6 mm, with 36 components from 21 distinct parts.

Its main chip is the RP2350_60QFN, from the RP2040/RP2350 family. Other key parts include the AMS1117-3.3 and W25Q16JVSS. By type, the board carries 19 capacitors, 5 resistors, 4 connectors, 3 ICs, 2 switches and 1 crystal.

From the project

🍪 Crumbs - Collection of my DIY Electronic Module

Rp2350a tempel, from the project README
From the project README

Main components on the Rp2350a tempel

AMS1117-3.3W25Q16JVSSRP2350_60QFN

Rp2350a tempel bill of materials (BOM)

36 components, 21 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
W25Q16JVSS
U2
1
RP2350_60QFN
U3
1
12Mhz HC49-SD
Y1
1
Conn_North
J1
1
Conn_East
J2
1
Conn_South
J3
1
Conn_West
J4
1
BOOT SELECTOR
SW1
1
RST
SW2
1
red
Vishay Semiconductors
D1
1
3.3uH
L1
9
100nF
C1, C6, C7, C8, C9, C10, C11, C12 +1
2
22uF
C2, C3
1
1uF
C4
4
4.7uF
C5, C15, C16, C17
1
2u2F
C14
2
12pF
C18, C19
3
1K
R1, R4, R5
1
2K2
R2
Show 1 more
QtyPartRefs
1
33
R3

Rp2350a tempel design files

The KiCad project lives in the ahsanu123/crumbs repository on GitHub; these links point at the commit this page was built from.

Rp2350a tempel: common questions

What microcontroller does the Rp2350a tempel use?

The Rp2350a tempel is built around the RP2350_60QFN, from the RP2040/RP2350 family.

How big is the Rp2350a tempel PCB?

The Rp2350a tempel measures 38.5 × 41.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rp2350a tempel?

36 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rp2350a tempel design files?

From the ahsanu123/crumbs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rp2350a tempel design in my own project?

Yes, under the terms of its MIT license, which ahsanu123 chose for the repository.

Can I test firmware for the Rp2350a tempel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in crumbs

Similar boards