Midi keyboard
aishahisap123-code·midi-keyboard·hardware pcb/instument.kicad_sch
About the Midi keyboard PCB
Midi keyboard is an open source ESP32 PCB design by aishahisap123-code, published on GitHub under the MIT license. It is a board, with 14 components from 8 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. Other key parts include the PCF8574AT and ADS1115IDGS. By type, the board carries 5 switches, 3 ICs, 3 diodes and 1 connector.
It belongs with the audio, keyboards and iot & wireless designs in this gallery.
From the project
MIDI35 is a custom geometric touch MIDI controller: a compact desktop instrument featuring tactile controls, capacitive piano keys, and drum pads. Instead of standard bulky hardware, you interact with it using direct touch surfaces and physical sliders.
MIDI35 is a custom geometric touch MIDI controller: a compact desktop instrument featuring tactile controls, capacitive piano keys, and drum pads. Instead of standard bulky hardware, you interact with it using direct touch surfaces and physical sliders.
PCB/ - KiCad source files and fabrication Gerber exports
Renders/ - front and back PCB 3D renders
Guide.md - project documentation and step-by-step workflow guide
Main components on the Midi keyboard
Midi keyboard bill of materials (BOM)
14 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 1 | PCF8574AT | SOIC-16W_7.5x10.3mm_P1.27mm | U2 |
| 1 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | Conn_01x11_Pin | keys and drums | J2 |
| 2 | R_Potentiometer_MountingPin | Potentiometer_Bourns_PTA1543_Single_Slide | RV1, RV2 |
| 2 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW5 |
| 3 | SW_Push | Kailh Choc Low-Profile Switches | SW2, SW3, SW4 |
| 3 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3 |
Midi keyboard design files
The KiCad project lives in the aishahisap123-code/midi-keyboard repository on GitHub; these links point at the commit this page was built from.
- Schematichardware pcb/instument.kicad_sch
Midi keyboard: common questions
What microcontroller does the Midi keyboard use?
The Midi keyboard is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How many components are on the Midi keyboard?
14 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Midi keyboard design files?
From the aishahisap123-code/midi-keyboard repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Midi keyboard design in my own project?
Yes, under the terms of its MIT license, which aishahisap123-code chose for the repository.
Can I test firmware for the Midi keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k