11 open source boards using the PCF8574AT

Real designs built with the PCF8574AT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the PCF8574AT

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the PCF8574AT connects to, and the resistors, capacitors and other passives placed on it.

  • The A2_3 pin is tied to GND on 6 of 7 designs.
  • The A1_2 pin is tied to GND on 5 of 7 designs.
  • The P3_7 pin has a series resistor on 3 of 7 designs, most often 10 kΩ (then 150 Ω).
  • The SCL_14 pin has a pull-up to 3.3V on 3 of 7 designs, most often 4.7 kΩ (then 10 kΩ).
A1_2pin 2Connected to: GND 71%
A2_3pin 3Connected to: GND 86%
P3_7pin 7Connected to: Signal 100%
  • Series resistor on 43% · 10 kΩ (1), 150 Ω (1), 1 kΩ (1)
GND_8pin 8Connected to: GND 100%
SCL_14pin 14Connected to: A connector 57%, the microcontroller 43%
  • Pull-up to 3.3V on 43% · 4.7 kΩ (2), 10 kΩ (1)
SDA_15pin 15Connected to: A connector 57%, the microcontroller 43%
  • Pull-up to 3.3V on 43% · 4.7 kΩ (2), 10 kΩ (1)
VDD_16pin 16Connected to: 3.3V 86%
  • Decoupling capacitor on 43% · 1 µF (1), 100 nF (1)

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ha by eljotx, Arnav hackpad by arnavshah100, ScreenHat by antek-elektronik and Chronos by CedricL1u.

The PCF8574AT in open source designs

The gallery holds 11 open source boards using the PCF8574AT from 9 GitHub repositories; a typical one measures about 92.1 × 63 mm and carries around 49 components.

89% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is Hb by eljotx.

Microcontrollers on boards using the PCF8574AT

PCF8574AT: common questions

Where can I find a PCF8574AT reference design?

Each of the 11 boards on this page is a real design using the PCF8574AT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PCF8574AT A2_3 pin connected?

The A2_3 pin is tied to GND on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the PCF8574AT.

How is the PCF8574AT A1_2 pin connected?

The A1_2 pin is tied to GND on 5 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the PCF8574AT.

What resistor goes on the PCF8574AT P3_7 pin?

The P3_7 pin has a series resistor on 3 of 7 designs, most often 10 kΩ (then 150 Ω). Counted from the KiCad layouts of 7 open source designs using the PCF8574AT.

Which microcontrollers do boards using the PCF8574AT use?

Most are built on ESP32 (3) and AVR/Arduino (1).

How big is a typical board using the PCF8574AT?

The median is 92.1 × 63 mm, and 89% are two-layer designs.

What is the most popular open source board using the PCF8574AT?

By GitHub stars, Hb by eljotx, with 2 stars.

Can I simulate one of these boards using the PCF8574AT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part