Fp test
AJC938·AI-PCB-Engineer·reports/v0.0.3/evidence/kicad/fp_test.kicad_pcb
About the Fp test PCB
Fp test is an open source PCB design by AJC938, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 30 mm, with 3 components from 3 distinct parts.
By type, the board carries 1 connector, 1 diode and 1 resistor.
It belongs with the sensors designs in this gallery.
From the project
Sensor Interface & Power Management Board for ESP32
An open-source electronics project delivering a protected sensor interface and peripheral power board for an external ESP32 DevKit.
The board organizes power and signal connections between an ESP32 DevKit and compatible peripherals. It provides protected 5 V distribution, a regulated 3.3 V peripheral rail, conditioned sensor signals, and I²C, UART, and GPIO headers. The ESP32 is a separate development board and is powered through its own USB connection.

Fp test bill of materials (BOM)
3 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1715721 5V_IN Phoenix Contact | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | WP7113ID Kingbright | LED_D5.0mm_WP7113ID | D1 |
| 1 | MFR-25FBF52-620R 620 Yageo | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Fp test design files
The KiCad project lives in the AJC938/AI-PCB-Engineer repository on GitHub; these links point at the commit this page was built from.
Fp test: common questions
How big is the Fp test PCB?
The Fp test measures 50 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fp test?
3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fp test design files?
From the AJC938/AI-PCB-Engineer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Fp test design in my own project?
Yes, under the terms of its MIT license, which AJC938 chose for the repository.
More boards in AI-PCB-Engineer
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956