Sensor Interface & Power Management Board for ESP32

AJC938·AI-PCB-Engineer·hardware/kicad/Sensor_Interface_Power_Board/Sensor_Interface_Power_Board.kicad_pcb

Sensor Interface & Power Management Board for ESP32 layout, top view — open source ESP32 board by AJC938

About the Sensor Interface & Power Management Board for ESP32

Sensor Interface & Power Management Board for ESP32 is an open source ESP32 PCB design by AJC938, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 64 mm, with 52 components from 33 distinct parts.

Its main chip is the HTSW-112-07-T-S, from the ESP32 family. Other key parts include the TLV1117LV33DCYR, SN74LVC1G17DBVR, SN74LVC1T45DBVR and TPS26600PWPR. By type, the board carries 18 resistors, 13 capacitors, 8 test points, 6 connectors, 5 ICs and 2 LEDs.

It belongs with the sensors designs in this gallery.

From the project

Sensor Interface & Power Management Board for ESP32

Requirements to open: KiCad 10.0.x with its standard libraries. No absolute paths are used. Custom symbols: none (all symbols are embedded in the schematic). Custom 3D models: none (U5 uses the KiCad HTSSOP-16 model).

The KiCad project folder stays at hardware/kicad/ (rather than being moved) so that the build scripts, report links and git history remain valid.

Main components on the Sensor Interface & Power Management Board for ESP32

Sensor Interface & Power Management Board for ESP32 bill of materials (BOM)

52 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TLV1117LV33DCYR
TLV1117LV33
Texas Instruments
U1
2
SN74LVC1G17DBVR
Texas Instruments
U2, U4
1
SN74LVC1T45DBVR
Texas Instruments
U3
1
TPS26600PWPR
Texas Instruments
U5
1
1715721
5V_IN
Phoenix Contact
J1
1
HTSW-112-07-T-S
ESP32_IF
Samtec
J2
1
HTSW-104-07-T-S
ULTRASONIC
Samtec
J3
1
HTSW-104-07-T-S
UART
Samtec
J4
1
HTSW-104-07-T-S
I2C
Samtec
J5
1
HTSW-104-07-T-S
GP_3V3
Samtec
J6
1
5015
VIN
Keystone Electronics
TP1
1
5015
+5V
Keystone Electronics
TP2
1
5015
+3V3
Keystone Electronics
TP3
1
5015
3V3_ESP
Keystone Electronics
TP4
2
5015
GND
Keystone Electronics
TP5, TP6
1
5015
ECHO_ESP
Keystone Electronics
TP7
1
5015
TRIG_5V
Keystone Electronics
TP8
1
WP7113ID
RED 5V
Kingbright
LED1
1
WP7113SGD
GREEN 3V3
Kingbright
LED2
3
CL10A106KP8NNNC
10uF
Samsung Electro-Mechanics
C1, C3, C8
Show 13 more
QtyPartRefs
8
GRM188R71C104KA01D
100nF
Murata
C2, C4, C5, C6, C7, C9, C10, C11
1
CL10A105KB8NNNC
1uF 50V
Samsung Electro-Mechanics
C12
1
CL10B473KB8NNNC
47nF
Samsung Electro-Mechanics
C13
1
ERJ-3EKF1501V
1.5k
Panasonic
R2
1
ERJ-3EKF6800V
680
Panasonic
R3
4
ERJ-3EKF1003V
100k
Panasonic
R4, R5, R7, R12
5
ERJ-3EKF1001V
1k
Panasonic
R6, R11, R13, R14, R15
2
ERJ-3EKF2201V
2.2k
Panasonic
R8, R9
1
ERJ-3EKF2200V
220
Panasonic
R10
1
ERJ-3EKF7322V
73.2k
Panasonic
R16
1
ERJ-3EKF5901V
5.9k
Panasonic
R17
1
ERJ-3EKF2152V
21.5k
Panasonic
R18
1
ERJ-3EKF2002V
20k
Panasonic
R19

Sensor Interface & Power Management Board for ESP32 design files

The KiCad project lives in the AJC938/AI-PCB-Engineer repository on GitHub; these links point at the commit this page was built from.

Sensor Interface & Power Management Board for ESP32: common questions

What microcontroller does the Sensor Interface & Power Management Board for ESP32 use?

The Sensor Interface & Power Management Board for ESP32 is built around the HTSW-112-07-T-S, from the ESP32 family.

How big is the Sensor Interface & Power Management Board for ESP32?

The Sensor Interface & Power Management Board for ESP32 measures 90 × 64 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sensor Interface & Power Management Board for ESP32?

52 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sensor Interface & Power Management Board for ESP32 design files?

From the AJC938/AI-PCB-Engineer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Sensor Interface & Power Management Board for ESP32 design in my own project?

Yes, under the terms of its MIT license, which AJC938 chose for the repository.

Can I test firmware for the Sensor Interface & Power Management Board for ESP32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in AI-PCB-Engineer

Similar boards