MQB Monitor Hardware

akcase18·MQB_Monitor_Hardware

MQB Monitor Hardware PCB layout, top view — open source ESP32 board by akcase18

About the MQB Monitor Hardware PCB

MQB Monitor Hardware is an open source ESP32 PCB design by akcase18, published on GitHub. It is a 4-layer board measuring 70.5 × 56.5 mm, with 47 components from 34 distinct parts.

Its main chip is the AMS1117-3.3, from the ESP32 family. Other key parts include the PAM2804AAB010, TPS62143 and ESP32-C3-WROOM-02. By type, the board carries 21 capacitors, 12 resistors, 5 ICs, 3 diodes, 2 connectors and 2 inductors.

It belongs with the displays & leds designs in this gallery.

From the project

PCB Design for MQB Monitor

This is the PCB used for my software project, MQB Monitor, and enables the software features found in that repository.

This project was fully designed in KiCad, with the intention of using JLCPCB for both PCB manufacturing and assembly.

This project was designed to be a full plug-and-play compact display that could be used to show configurable information as reported by my car. I wanted installation to be easy and fully reversible, and require little-to-know technical knowledge in order to get it up and running.

Main components on the MQB Monitor Hardware

MQB Monitor Hardware bill of materials (BOM)

47 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PAM2804AAB010
IC1
1
TPS62143
PLMR54410DBVR
U1
1
AMS1117-3.3
U2
1
AMS1117-3.3
ESP32-S3-WROOM-1
U3
1
ESP32-C3-WROOM-02
SN65HVD230
U4
1
AFC01-S50FCA-00
J1
1
N/A
4-Pin to Car
J2
1
C2689521
Push Button
S2
1
C2988369
USB-C Port
USB1
2
C8678
Diode
D1, D2
1
PESD1CAN,215
D3
1
10UH
4.7uH
L1
1
2.2UH
15uH
L2
1
1UF
0.1uF
C1
1
4.7UF
10uF
C2
3
10UF
10uF
C3, C10, C11
1
3.3NF
10uF
C4
1
22UF
0.1uF
C5
5
10UF
0.1uF
C6, C12, C13, C17, C18
1
10UF
22uF
C7
Show 14 more
QtyPartRefs
1
0.1UF
22uF
C8
2
0.1UF
0.1uF
C9, C21
3
0.1UF
10uF
C14, C15, C19
1
10UF
1uF
C16
1
1UF
10uF
C20
1
5.1K
100k
R1
1
5.1K
1R
R2
1
5.1K
10R
R3
1
5.1K
5.1k
R4
1
100K
5.1k
R5
1
C22977
51k
R6
4
10K
10k
R7, R10, R11, R12
1
10k
R8
1
10K
1k
R9

MQB Monitor Hardware design files

The KiCad project lives in the akcase18/MQB_Monitor_Hardware repository on GitHub; these links point at the commit this page was built from.

MQB Monitor Hardware: common questions

What microcontroller does the MQB Monitor Hardware use?

The MQB Monitor Hardware is built around the AMS1117-3.3, from the ESP32 family.

How big is the MQB Monitor Hardware PCB?

The MQB Monitor Hardware measures 70.5 × 56.5 mm, has 4 copper layers and is 1.565 mm thick.

How many components are on the MQB Monitor Hardware?

47 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MQB Monitor Hardware design files?

From the akcase18/MQB_Monitor_Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MQB Monitor Hardware design in my own project?

The repository has no license, so all rights stay with akcase18. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MQB Monitor Hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards