Bluetooth app
alantrundle·bluetooth_app·hardware/NFC_ESP32_V2/NFC_ESP32_V2.kicad_pcb
About the Bluetooth app PCB
Bluetooth app is an open source ESP32 PCB design by alantrundle, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 50 mm, with 58 components from 32 distinct parts.
Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the CH340C, MCP73831-2-OT, AP2112K-3.3 and RC522. By type, the board carries 26 capacitors, 11 resistors, 5 ICs, 4 transistors, 4 diodes and 2 connectors.
It belongs with the iot & wireless designs in this gallery, and the repository also holds 1 earlier revision of it.
Main components on the Bluetooth app
Bluetooth app bill of materials (BOM)
58 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32D ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | MCP73831-2-OT | SOT-23-5 | U3 |
| 1 | AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | RC522 | HVQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias | U5 |
| 2 | BSS138 | SOT-23 | Q1, Q2 |
| 1 | DMG2301L | SOT-23 | Q3 |
| 1 | MMBT3904 | SOT-23 | Q5 |
| 1 | C164053 Crystal 27.12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_JAE_DX07S016JA1R1500 | J1 |
| 1 | CONN_01X02 Conn_01x02 | JST_ZH_S2B-ZR-SM4A-TF_1x02-1MP_P1.50mm_Horizontal | J2 |
| 1 | ~ | RFID_Antenna2 | ANT1 |
| 1 | Speaker | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | LS1 |
| 1 | C226259 SW_SPST | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 2 | LED | LED_0603_1608Metric | D1, D3 |
| 1 | MBR0520 | D_SOD-123 | D2 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4 |
| 2 | 470NH 470nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1, L2 |
| 10 | 100N 100n | C_0603_1608Metric | C1, C2, C5, C7, C19, C21, C23, C24 +2 |
| 3 | 10U 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C22 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1u | C_0603_1608Metric | C6, C20 |
| 2 | 22P 22p | C_0603_1608Metric | C8, C9 |
| 1 | 1n | C_0603_1608Metric | C10 |
| 2 | 220P 220p | C_0603_1608Metric | C11, C12 |
| 2 | 56P 56p | C_0603_1608Metric | C13, C18 |
| 2 | 100P 100p | C_0603_1608Metric | C14, C16 |
| 2 | 33P 33p | C_0603_1608Metric | C15, C17 |
| 3 | 1k | R_0603_1608Metric | R1, R3, R8 |
| 1 | 2k | R_0603_1608Metric | R2 |
| 3 | 5K1 5k1 | R_0603_1608Metric | R4, R5, R6 |
| 3 | 10K 10k | R_0603_1608Metric | R7, R9, R11 |
| 1 | 220 | R_0603_1608Metric | R10 |
Bluetooth app design files
The KiCad project lives in the alantrundle/bluetooth_app repository on GitHub; these links point at the commit this page was built from.
Bluetooth app: common questions
What microcontroller does the Bluetooth app use?
The Bluetooth app is built around the ESP32-WROOM-32D, from the ESP32 family.
How big is the Bluetooth app PCB?
The Bluetooth app measures 90 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bluetooth app?
58 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bluetooth app design files?
From the alantrundle/bluetooth_app repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bluetooth app design in my own project?
Yes, under the terms of its MIT license, which alantrundle chose for the repository.
Can I test firmware for the Bluetooth app without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Earlier revisions in the repo: NFC_ESP32
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k