Halflife

AlexGullish·Halflife-PCB·KiCAD/HalfLife PCB.kicad_pcb

Halflife PCB layout, top view — open source ESP32 board by AlexGullish

About the Halflife PCB

Halflife is an open source ESP32 PCB design by AlexGullish, published on GitHub under the MIT license. It is a 2-layer board measuring 102 × 87 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

A digital pet built around a Seeed XIAO ESP32-C3.

A digital pet built around a Seeed XIAO ESP32-C3.

- Animated 32 × 32 pixel pet - Tilt-controlled radial menu with four actions: NAP, PLAY, FEED, and PET. - Two physical buttons for menu confirmation and pet stats. - Pet stats for joy, energy, and fullness. - Motion/shake reaction. - Sleep, movement, jumping, and heart effects. - DHT11 temperature readings, which can affect the pet's mood. - Persistent pet settings

Halflife, from the project README
From the project README

Main components on the Halflife

Halflife bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DHT11
U1
1
XIAO-ESP32-C3-SMD
U2
1
CONN_01X04_PIN
Conn_01x04_Pin
J1
1
CONN_01X08_PIN
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10K
10k
R1

Halflife design files

The KiCad project lives in the AlexGullish/Halflife-PCB repository on GitHub; these links point at the commit this page was built from.

Halflife: common questions

What microcontroller does the Halflife use?

The Halflife is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Halflife PCB?

The Halflife measures 102 × 87 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Halflife?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Halflife design files?

From the AlexGullish/Halflife-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Halflife design in my own project?

Yes, under the terms of its MIT license, which AlexGullish chose for the repository.

Can I test firmware for the Halflife without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards