V11-rounded

alperbasarn·QNOB·V11/V11-rounded.kicad_pcb

V11-rounded PCB layout, top view — open source ESP32 board by alperbasarn

About the V11-rounded PCB

V11-rounded is an open source ESP32 PCB design by alperbasarn, published on GitHub. It is a 2-layer board measuring 47.9 × 47.4 mm, with 25 components from 13 distinct parts.

Its main chip is the ESP32-C3_SUPERMINI, from the ESP32 family. Other key parts include the DRV8311HRWR and MT6701QT. By type, the board carries 10 resistors, 9 capacitors, 3 ICs and 3 connectors.

From the project

HID with tactile feedback

Main components on the V11-rounded

V11-rounded bill of materials (BOM)

25 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DRV8311HRWR
~
U1
1
ESP32-C3_SUPERMINI
U2
1
MT6701QT
U3
1
Conn_01x04
J1
1
Conn_01x03
J3
1
Conn_01x05
J4
4
100N
100n
C1, C3, C5, C9
1
4.7U
4.7u
C2
2
10U
10u
C4, C6
1
100N
10u
C7
1
10U
100n
C8
7
0
R1, R2, R3, R4, R5, R6, R10
3
4.7K
4.7k
R7, R8, R9

V11-rounded design files

The KiCad project lives in the alperbasarn/QNOB repository on GitHub; these links point at the commit this page was built from.

V11-rounded: common questions

What microcontroller does the V11-rounded use?

The V11-rounded is built around the ESP32-C3_SUPERMINI, from the ESP32 family.

How big is the V11-rounded PCB?

The V11-rounded measures 47.9 × 47.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the V11-rounded?

25 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the V11-rounded design files?

From the alperbasarn/QNOB repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the V11-rounded design in my own project?

The repository has no license, so all rights stay with alperbasarn. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the V11-rounded without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in QNOB

Similar boards