QNOB V6

alperbasarn·QNOB·PCB/V6/QNOB_V6/QNOB_V6/QNOB_V6.kicad_pcb

QNOB V6 PCB layout, top view — open source ESP32 board by alperbasarn

About the QNOB V6 PCB

QNOB V6 is an open source ESP32 PCB design by alperbasarn, published on GitHub. It is a 2-layer board measuring 47.6 × 47.6 mm, with 179 components from 26 distinct parts.

Its main chip is the ESP32-C3_SUPERMINI, from the ESP32 family. Other key parts include the DRV8311HRRWR. By type, the board carries 102 ICs, 62 capacitors, 6 resistors, 4 fuses, 3 connectors and 2 diodes.

From the project

HID with tactile feedback

Main components on the QNOB V6

QNOB V6 bill of materials (BOM)

179 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
DRV8311HRRWR
MT6701QT
U2
99
~
U6, U7, U8, U9, U10, U11, U12, U13 +91
1
ESP32-C3_SUPERMINI
U56
1
Conn_01x03
J1
2
Conn_01x05
J2, J3
2
500MA
500m
F1, F2
1
500MA
1A
F4
1
500m
F5
1
D_SOD-323
ESD5Zxx
D2
1
ESD5Zxx
D3
1
4.7U
10u
C1
1
10U
10u
C2
1
10U
100n
C3
4
100N
10u
C4, C5, C6, C7
3
100N/0402
100n
C8, C10, C12
1
100n
C9
1
100N/0402
4.7u
C11
46
100N/0402
100n 10V
C16, C17, C18, C19, C20, C21, C22, C23 +38
2
10U
100n 10V
C60, C64
Show 6 more
QtyPartRefs
1
100n 10V
C61
1
100N
100n 10V
C65
1
4.7k
R1
1
4.7K
0
R2
2
4.7K
4.7k
R3, R4
2
500
R6, R7

QNOB V6 design files

The KiCad project lives in the alperbasarn/QNOB repository on GitHub; these links point at the commit this page was built from.

QNOB V6: common questions

What microcontroller does the QNOB V6 use?

The QNOB V6 is built around the ESP32-C3_SUPERMINI, from the ESP32 family.

How big is the QNOB V6 PCB?

The QNOB V6 measures 47.6 × 47.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the QNOB V6?

179 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the QNOB V6 design files?

From the alperbasarn/QNOB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the QNOB V6 design in my own project?

The repository has no license, so all rights stay with alperbasarn. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the QNOB V6 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in QNOB

Earlier revisions in the repo: QNOB_V5

Similar boards