HardLabs

Alvestav lee thesis project-2025

alvestav·alvestav-lee-thesis-project-2025·RP-006442-DD-2-RP2350B Minimal Board Kicad archive/RP2350_80QFN_minimal.kicad_pcb

Alvestav lee thesis project-2025 PCB layout, top view — open source RP2040/RP2350 board by alvestav
Simulate this board

About the Alvestav lee thesis project-2025 PCB

Alvestav lee thesis project-2025 is an open source RP2040/RP2350 PCB design by alvestav, published on GitHub under the MIT license. It is a 2-layer board measuring 99.4 × 99.4 mm, with 166 components from 42 distinct parts.

Its main chip is the RP2350_80QFN, from the RP2040/RP2350 family. Other key parts include the NCP1117-3.3_SOT223, W25Q128JVS, RP2350_60QFN, HT16K33A-24SSOP and 74HC595. By type, the board carries 53 resistors, 48 capacitors, 29 diodes, 16 ICs, 10 switches and 6 connectors.

From the project

This is the GitHub repository for the thesis project in computer and electronics engineering by Alvestav and Lee

Main components on the Alvestav lee thesis project-2025

RP2350_80QFNNCP1117-3.3_SOT223W25Q128JVSRP2350_60QFNHT16K33A-24SSOP74HC595MMA8451QR1GS3011CR-G

Alvestav lee thesis project-2025 bill of materials (BOM)

166 components, 42 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2350_80QFN
U1
2
NCP1117-3.3_SOT223
U2, U6
2
W25Q128JVS
U3, U5
1
DNF
U4
1
RP2350_60QFN
U7
1
HT16K33A-24SSOP
U8
3
74HC595
U10, U11, U12
1
MMA8451QR1
U13
4
GS3011CR-G
U14, U15, U16, U17
2
ABM8-272-T3
Y1, Y2
2
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1, J5
1
CONN_02X14_ODD_EVEN
Conn_02x14_Odd_Even
J2
1
CONN_02X09_ODD_EVEN
Conn_02x09_Odd_Even
J3
1
CONN_01X03
Conn_01x03
J4
1
CONN_01X05
Conn_01x05
J6
4
SW_Push
SW1, SW2, SW3, SW4
4
SW_Push
SW5, SW6, SW7, SW8
1
C2890358
SW_SPDT
SW9
1
SW_DIP_X08
SW_DIP_x08
SW10
24
LED
D1, D2, D3, D4, D5, D6, D7, D8 +16
Show 22 more
QtyPartRefs
1
C7429914
EMERALD
D25
1
C72038
YELLOW
D26
2
PMEG6010ELR
D27, D28
1
C2286
RED
D29
2
3.3U
3.3u
L1, L2
6
10U
10u
C1, C5, C19, C23, C27, C41
28
100N
100n
C2, C8, C11, C12, C13, C14, C15, C16 +20
4
15P
15p
C3, C4, C24, C25
4
4.7U
4.7u
C6, C7, C28, C29
5
4.7U
4.7u
C9, C10, C31, C32, C45
1
DNF
C22
6
DNF
R1, R9, R11, R13, R14, R16
6
1k
R2, R4, R6, R17, R18, R20
2
33
R3, R19
4
5.1K
5.1k
R5, R12, R23, R24
4
27
R7, R8, R21, R22
2
0
R10, R15
2
4.7K
4.7k
R26, R43
24
470
R27, R28, R29, R30, R31, R32, R33, R34 +16
1
560
R44
1
180
R45
1
820
R46

Alvestav lee thesis project-2025 design files

The KiCad project lives in the alvestav/alvestav-lee-thesis-project-2025 repository on GitHub; these links point at the commit this page was built from.

Alvestav lee thesis project-2025: common questions

What microcontroller does the Alvestav lee thesis project-2025 use?

The Alvestav lee thesis project-2025 is built around the RP2350_80QFN, from the RP2040/RP2350 family.

How big is the Alvestav lee thesis project-2025 PCB?

The Alvestav lee thesis project-2025 measures 99.4 × 99.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Alvestav lee thesis project-2025?

166 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Alvestav lee thesis project-2025 design files?

From the alvestav/alvestav-lee-thesis-project-2025 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Alvestav lee thesis project-2025 design in my own project?

Yes, under the terms of its MIT license, which alvestav chose for the repository.

Can I test firmware for the Alvestav lee thesis project-2025 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards