5 open source boards using the MMA8451QR1
Real designs built with the MMA8451QR1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Alvestav lee thesis project-2025
alvestav
99.4 × 99.4 mm166 parts2LMIT0RP2040/RP2350
PPSE Board Code
G10v4nn
104.1 × 79.4 mm132 parts2LNo license0AVR/Arduino
PCB Business Card
Bumb1eris
85.6 × 54 mm73 parts2LMIT0Tama
rough-rat
35 × 50 mm68 parts4LNo license0STM32
OpenRow
set321go
51 × 60 mm55 parts2LMIT0
How designs wire the MMA8451QR1
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MMA8451QR1 connects to, and the resistors, capacitors and other passives placed on it.
- The BYP pin has a capacitor to GND on 5 of 5 designs, most often 100 nF.
- The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 4.7 kΩ (then 3 kΩ).
- The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 4.7 kΩ (then 3 kΩ).
- The NC_2 pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDIOpin 1 | Connected to: 3.3V 100% |
|
| BYPpin 2 | Connected to: Signal 100% |
|
| NC_2pin 3 | Connected to: Not connected 100% | — |
| SCLpin 4 | Connected to: The microcontroller 80% |
|
| GND_3pin 5 | Connected to: GND 100% | — |
| SDApin 6 | Connected to: The microcontroller 80% |
|
| SA0pin 7 | Connected to: GND 80% · a signal 20% | — |
| NC_5pin 8 | Connected to: Not connected 100% | — |
| INT2pin 9 | Connected to: Not connected 60% · a signal 40% | — |
| GND_2pin 10 | Connected to: GND 100% | — |
| GNDpin 12 | Connected to: GND 100% | — |
| NC_3pin 13 | Connected to: Not connected 100% | — |
| VDDpin 14 | Connected to: 3.3V 100% |
|
| NC_4pin 15 | Connected to: Not connected 100% | — |
| NCpin 16 | Connected to: Not connected 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Alvestav lee thesis project-2025 by alvestav, PCB Business Card by Bumb1eris, PPSE Board Code by G10v4nn and Tama by rough-rat.
The MMA8451QR1 in open source designs
The gallery holds 5 open source boards using the MMA8451QR1 from 5 GitHub repositories; a typical one measures about 85.6 × 60 mm and carries around 73 components.
80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Alvestav lee thesis project-2025 by alvestav.
Microcontrollers on boards using the MMA8451QR1
What boards using the MMA8451QR1 are built for
MMA8451QR1: common questions
Where can I find a MMA8451QR1 reference design?
Each of the 5 boards on this page is a real design using the MMA8451QR1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MMA8451QR1 BYP pin connected?
The BYP pin has a capacitor to GND on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MMA8451QR1.
What pull-up resistor is used on the MMA8451QR1 SCL pin?
The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 4.7 kΩ (then 3 kΩ). Counted from the KiCad layouts of 5 open source designs using the MMA8451QR1.
What pull-up resistor is used on the MMA8451QR1 SDA pin?
The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 4.7 kΩ (then 3 kΩ). Counted from the KiCad layouts of 5 open source designs using the MMA8451QR1.
Which microcontrollers do boards using the MMA8451QR1 use?
Most are built on RP2040/RP2350 (2), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the MMA8451QR1?
The median is 85.6 × 60 mm, and 80% are two-layer designs.
What is the most popular open source board using the MMA8451QR1?
By GitHub stars, Alvestav lee thesis project-2025 by alvestav, with 0 stars.
Can I simulate one of these boards using the MMA8451QR1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.