Esp32s3-bms
amar-jay·kicad-templates·Projects/esp32s3-bms/esp32s3-bms.kicad_pcb
About the Esp32s3-bms PCB
Esp32s3-bms is an open source ESP32 PCB design by amar-jay, published on GitHub under the Custom license license. It is a 4-layer board measuring 58.5 × 26.5 mm, with 32 components from 19 distinct parts.
Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the BQ24072RGT and TLV75801PDRV. By type, the board carries 10 resistors, 8 capacitors, 4 diodes, 3 ICs, 3 connectors and 2 switches.
It belongs with the power & battery designs in this gallery.
From the project
amarjay's kicad templates
This repository contains the official KiCad project and worksheet templates.
Contribution guidelines can be found at http://kicad.org/libraries/contribute The library convention can be found at http://kicad.org/libraries/klc/
Other KiCad library repositories are located:
Symbols: https://gitlab.com/kicad/libraries/kicad-symbols Footprints: https://gitlab.com/kicad/libraries/kicad-footprints * 3D Models: https://gitlab.com/kicad/libraries/kicad-packages3d
Main components on the Esp32s3-bms
Esp32s3-bms bill of materials (BOM)
32 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ24072RGT | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U1 |
| 1 | TLV75801PDRV | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U2 |
| 1 | ESP32-S3-MINI-1 | ESP32-S2-MINI-1 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | Barrel_Jack | BarrelJack_CUI_PJ-063AH_Horizontal | J2 |
| 1 | B2B-PH-K-S | B2BPHKS | J3 |
| 2 | C | C_0603_1608Metric | 0u1F1, 0u1F2 |
| 2 | SW_Push | SW_SPST_PTS810 | SW1, SW2 |
| 1 | ESD7104MUTAG | ESD8104MUTAG | D1 |
| 3 | LED | LED_0603_1608Metric | D2, D3, D4 |
| 3 | C | C_0603_1608Metric | C1, C8, C9 |
| 3 | 1uF | C_0603_1608Metric | C2, C6, C7 |
| 2 | 4u7F | C_0603_1608Metric | C3, C4 |
| 2 | 47kR | R_0201_0603Metric | R1, R2 |
| 2 | 1kR | R_0201_0603Metric | R3, R4 |
| 1 | 10kR | R_0201_0603Metric | R5 |
| 2 | 1k5R | R_0201_0603Metric | R6, R7 |
| 2 | R | R_0201_0603Metric | R8, R9 |
| 1 | 1k | R_0201_0603Metric | R10 |
Esp32s3-bms design files
The KiCad project lives in the amar-jay/kicad-templates repository on GitHub; these links point at the commit this page was built from.
Esp32s3-bms: common questions
What microcontroller does the Esp32s3-bms use?
The Esp32s3-bms is built around the ESP32-S3-MINI-1, from the ESP32 family.
How big is the Esp32s3-bms PCB?
The Esp32s3-bms measures 58.5 × 26.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Esp32s3-bms?
32 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32s3-bms design files?
From the amar-jay/kicad-templates repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32s3-bms design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Esp32s3-bms without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in kicad-templates
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k