20 open source boards using the BQ24072RGT
Real designs built with the BQ24072RGT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Game and watch hardware
Upcycle-Electronics
108.7 × 55.1 mm155 parts4LMIT139STM32
Cyberboard
notaroomba
51 × 21 mm64 parts4LNo license17Sharket
zephray
67.2 × 58.2 mm223 parts4LNo license1RP2040/RP2350
Shitty kitty v2
Uberfoo-Heavy-Industries
82.4 × 79.7 mm63 parts2LNo license1Sending Pebble
CohenMurray
50 × 50 mm60 parts4LNo license1StarShield 95-key wireless
DankFlumeMister
374.7 × 151.1 mm313 parts4LCERN-OHL-S-2.00ESP32
TrabajoFinal MIoT
m-scasserra
102.6 × 148 mm232 parts4LNo license0STM32
RJX-Embedded-Training-Kit
MUDAL
69.7 × 70.9 mm103 parts2LGPL-3.00ESP32
Meshtastic v0
luthfai
71 × 46 mm74 parts2LNo license0ESP32
Raster bot
rhammell
65 × 28 mm63 parts4LNo license0STM32
PRT ATHIQ BQ24072 DevBoard
bajraan
100 × 100 mm63 parts4LCC0-1.00RP2040/RP2350
Fudge board
mudd-spec
21 × 51 mm50 parts2LNo license0ESP32
Esp32s3-bms
amar-jay
58.5 × 26.5 mm32 parts4LCustom license0STM32
Cyberboard Panel
notaroomba
51 × 44 mm64 parts4LNo license17ESP32
CO2 SENSOR
odobot
20 × 73.4 mm44 parts4LNo license1ESP32
Meshtastic v0-rounded
luthfai
71 × 46 mm71 parts2LNo license0RP2040/RP2350
RP2040 Minimal Design Example
Envious-Data
21.2 × 51.6 mm50 parts2LGPL-3.0151ESP32
Esp32s2-co2-monitor
gregdavill
70.3 × 42.8 mm67 parts4LNo license178ESP32
ESP32S2 Breakout
gregdavill
70.3 × 42.8 mm64 parts4LNo license178ESP32
Esp32s2-lepton
gregdavill
34.6 × 30.8 mm62 parts4LNo license178
How designs wire the BQ24072RGT
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the BQ24072RGT connects to, and the resistors, capacitors and other passives placed on it.
- The ISET pin has a resistor to GND on 16 of 16 designs, most often 1 kΩ (then 1.13 kΩ).
- The OUT pins have a capacitor to GND on 14 of 16 designs, most often 4.7 µF (then 1 µF).
- The ILIM pin has a resistor to GND on 14 of 16 designs, most often 1.18 kΩ (then 1.1 kΩ).
- The TS pin has a resistor to GND on 12 of 16 designs, most often 10 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| TSpin 1 | Connected to: Signal 94% |
|
| BATpin 2, 3 | Connected to: Signal 56% · VBAT 44% |
|
| CEpin 4 | Connected to: GND 75% · a signal 25% | — |
| EN2pin 5 | Connected to: Signal 50% · GND 19% · VCC 31% |
|
| EN1pin 6 | Connected to: GND 69% · a signal 19% | — |
| VSSpin 8, 17 | Connected to: GND 100% | — |
| OUTpin 10, 11 | Connected to: Signal 56% · VCC 44% |
|
| ILIMpin 12 | Connected to: Signal 88% |
|
| INpin 13 | Connected to: VBUS 69% · a signal 31% | — |
| TMRpin 14 | Connected to: Not connected 44% · GND 19% · a signal 38% |
|
| TDpin 15 | Connected to: GND 75% · a signal 25% | — |
| ISETpin 16 | Connected to: Signal 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32S2 Breakout by gregdavill, RP2040 Minimal Design Example by Envious-Data, Game and watch hardware by Upcycle-Electronics and Cyberboard by notaroomba.
The BQ24072RGT in open source designs
The gallery holds 20 open source boards using the BQ24072RGT from 16 GitHub repositories; a typical one measures about 68.4 × 50.5 mm and carries around 64 components.
70% use four copper layers or more, and 25% carry an open source license.
The most starred is Esp32s2-co2-monitor by gregdavill.
Parts used alongside the BQ24072RGT
Microcontrollers on boards using the BQ24072RGT
What boards using the BQ24072RGT are built for
BQ24072RGT: common questions
Where can I find a BQ24072RGT reference design?
Each of the 20 boards on this page is a real design using the BQ24072RGT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the BQ24072RGT ISET pin?
The ISET pin has a resistor to GND on 16 of 16 designs, most often 1 kΩ (then 1.13 kΩ). Counted from the KiCad layouts of 16 open source designs using the BQ24072RGT.
How is the BQ24072RGT OUT pin connected?
The OUT pins have a capacitor to GND on 14 of 16 designs, most often 4.7 µF (then 1 µF). Counted from the KiCad layouts of 16 open source designs using the BQ24072RGT.
What resistor goes on the BQ24072RGT ILIM pin?
The ILIM pin has a resistor to GND on 14 of 16 designs, most often 1.18 kΩ (then 1.1 kΩ). Counted from the KiCad layouts of 16 open source designs using the BQ24072RGT.
What parts are used alongside the BQ24072RGT?
The RP2040, BQ27441-G1, ESP32-S3-MINI-1, ESP32-S3-WROOM-1 and USBLC6-2P6 appear in the most repositories here.
Which microcontrollers do boards using the BQ24072RGT use?
Most are built on ESP32 (9), STM32 (5) and RP2040/RP2350 (3).
How big is a typical board using the BQ24072RGT?
The median is 68.4 × 50.5 mm, and 30% are two-layer designs.
What is the most popular open source board using the BQ24072RGT?
By GitHub stars, Esp32s2-co2-monitor by gregdavill, with 178 stars.
Can I simulate one of these boards using the BQ24072RGT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.