13 open source boards using the TLV75801PDRV
Real designs built with the TLV75801PDRV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Lego gameboy main
greigs
50.9 × 63.2 mm45 parts4LNo license14ESP32
Hardware-TUDCTF2025
Emway79
49.5 × 57.7 mm56 parts2LCC-BY-SA-4.03ESP32
ESP-32-Dev-Board
Fred98246
25.4 × 62.7 mm27 parts4LMIT2ESP32
SignalForge multi
saufik-ramadhan
67 × 62.8 mm62 parts4LApache-2.00ESP32
Durra NoteBook HW
meshalalhazmi
57.3 × 62.8 mm54 parts4LNo license0ESP32
Air Quality Monitering System
SREE-VISHNU-N
72.3 × 33.7 mm54 parts4LNo license0ESP32
Esp32s3-bms
amar-jay
58.5 × 26.5 mm32 parts4LCustom license0ESP32
WeatherStation
kermitsgonnakermicide
38.4 × 33.5 mm27 parts4LNo license0ESP32
ESP32-S3-Dev-Board-Project
andresmoreno2702-gif
26.4 × 56.9 mm26 parts4LMIT0ESP32
DevKitTell
NikolasKelava
25.5 × 62.8 mm26 parts4LMIT2ESP32
PCB
saufik-ramadhan
42 × 72 mm39 parts4LApache-2.00ESP32
Arduino Nano
SREE-VISHNU-N
43.2 × 17.8 mm33 parts4LNo license0ESP32
ESP32
SREE-VISHNU-N
25.9 × 64.3 mm16 parts4LNo license0
How designs wire the TLV75801PDRV
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the TLV75801PDRV connects to, and the resistors, capacitors and other passives placed on it.
- The FB pin has a resistor to GND on 9 of 10 designs, most often 200 kΩ.
- The FB pin has a pull-up to 3.3V on 9 of 10 designs, most often 1 MΩ.
- The IN pin has a capacitor to GND on 9 of 9 designs, most often 10 µF (then 1 µF).
- The EN pin has a capacitor to GND on 8 of 9 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: 3.3V 90% | — |
| FBpin 2 | Connected to: Signal 90% |
|
| GNDpin 3, 7 | Connected to: GND 95% | — |
| ENpin 4 | Connected to: A connector 56%, D3V3XA4B10LP 22% · VSYS 33% |
|
| DNCpin 5 | Connected to: Not connected 100% | — |
| INpin 6 | Connected to: A connector 67%, D3V3XA4B10LP 22% · VSYS 33% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Lego gameboy main by greigs, Hardware-TUDCTF2025 by Emway79, ESP-32-Dev-Board by Fred98246 and DevKitTell by NikolasKelava.
The TLV75801PDRV in open source designs
The gallery holds 13 open source boards using the TLV75801PDRV from 10 GitHub repositories; a typical one measures about 43.2 × 62.7 mm and carries around 33 components.
92% use four copper layers or more, and 46% carry an open source license.
The most starred is Lego gameboy main by greigs.
Parts used alongside the TLV75801PDRV
Microcontrollers on boards using the TLV75801PDRV
What boards using the TLV75801PDRV are built for
TLV75801PDRV: common questions
Where can I find a TLV75801PDRV reference design?
Each of the 13 boards on this page is a real design using the TLV75801PDRV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TLV75801PDRV FB pin?
The FB pin has a resistor to GND on 9 of 10 designs, most often 200 kΩ. Counted from the KiCad layouts of 10 open source designs using the TLV75801PDRV.
How is the TLV75801PDRV IN pin connected?
The IN pin has a capacitor to GND on 9 of 9 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the TLV75801PDRV.
How is the TLV75801PDRV EN pin connected?
The EN pin has a capacitor to GND on 8 of 9 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the TLV75801PDRV.
What parts are used alongside the TLV75801PDRV?
The ESP32-S3-MINI-1-N8, D3V3XA4B10LP, ENS210, ESD7104MUTAG and ESP32-S3-MINI-1 appear in the most repositories here.
Which microcontrollers do boards using the TLV75801PDRV use?
Most are built on ESP32 (13).
How big is a typical board using the TLV75801PDRV?
The median is 43.2 × 62.7 mm, and 8% are two-layer designs.
What is the most popular open source board using the TLV75801PDRV?
By GitHub stars, Lego gameboy main by greigs, with 14 stars.
Can I simulate one of these boards using the TLV75801PDRV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.