Arduino ph sensor
ameliaritger·arduino-ph-sensor·hardware/pcbDesign/ph-sensor.kicad_pcb
About the Arduino ph sensor PCB
Arduino ph sensor is an open source PCB design by ameliaritger, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 86.8 × 38.1 mm, with 21 components from 13 distinct parts.
Other key parts include the ADS_Ritger, DS3231MZ, NRF24L01_Breakout and Adafruit_Feather_M0_Adalogger. By type, the board carries 8 resistors, 5 capacitors, 4 ICs, 2 connectors, 1 module and 1 switch.
It belongs with the sensors designs in this gallery.
From the project
Repository containing scripts and files related to intertidal pH sensor development and testing
This repository is maintained by Hofmann Lab graduate student Amelia Ritger (GitHub: @ameliaritger) at the University of California, Santa Barbara in the Department of Ecology, Evolution, & Marine Biology. Please direct any questions or comments about this repository to Amelia Ritger.
Main components on the Arduino ph sensor
Arduino ph sensor bill of materials (BOM)
21 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ADS_Ritger | ADC_amelia_nomount | U1, U2 |
| 1 | DS3231MZ | DS3231RTC_amelia | U3 |
| 1 | NRF24L01_Breakout | NRF24L01Module | U4 |
| 1 | Adafruit_Feather_M0_Adalogger | Adalogger_amelia_nomount | A1 |
| 1 | Conn_01x06_Pin | PinSocket_1x06_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x03_Pin | PinSocket_1x03_P2.54mm_Horizontal | J2 |
| 1 | SW_Reed | REED_amelia | SW1 |
| 1 | 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 3 | 100uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3, C4 |
| 1 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 5 | 1M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R5, R6, R7 |
| 2 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 1 | 15k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
Arduino ph sensor design files
The KiCad project lives in the ameliaritger/arduino-ph-sensor repository on GitHub; these links point at the commit this page was built from.
Arduino ph sensor: common questions
How big is the Arduino ph sensor PCB?
The Arduino ph sensor measures 86.8 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arduino ph sensor?
21 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Arduino ph sensor design files?
From the ameliaritger/arduino-ph-sensor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Arduino ph sensor design in my own project?
Yes, under the terms of its Apache-2.0 license, which ameliaritger chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956