Solar Tracking System
Ammar-Bin-Amir·Solar_Tracking_System·Solar_Tracking_System_Project/Solar_Tracking_System_Project.kicad_pcb
About the Solar Tracking System PCB
Solar Tracking System is an open source PCB design by Ammar-Bin-Amir, published on GitHub. It is a 2-layer board measuring 149.9 × 58.7 mm, with 37 components from 22 distinct parts.
Other key parts include the LM7805_TO220, LM358, LM555xM and L293D. By type, the board carries 13 resistors, 9 connectors, 6 diodes, 5 ICs and 2 capacitors.
It belongs with the power & battery designs in this gallery.
From the project
Making the Solar Panel Efficiency to Maximum
The main objective of the project is to harness maximum amount of sunlight from sun and convert it into electricity. This can be done by aligning the solar panel perpendicular to sun rays so that maximum sunlight can be converted into electrical energy.
Main components on the Solar Tracking System
Solar Tracking System bill of materials (BOM)
37 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805_TO220 | TO-220-3_Vertical | U0 |
| 2 | LM358 | DIP-8_W7.62mm_Socket_LongPads | U1, U2 |
| 1 | LM555xM | DIP-8_W7.62mm_Socket_LongPads | U3 |
| 1 | L293D | DIP-16_W7.62mm_Socket_LongPads | U4 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J0 |
| 1 | Motor 1 Pin 1 | PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | Motor 1 Pin 1 | PinSocket_1x01_P2.54mm_Vertical | J2 |
| 1 | Motor 1 Pin 2 | PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | Motor 1 Pin 2 | PinSocket_1x01_P2.54mm_Vertical | J4 |
| 1 | Motor 2 Pin 1 | PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | Motor 2 Pin 1 | PinSocket_1x01_P2.54mm_Vertical | J6 |
| 1 | Motor 2 Pin 2 | PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | Motor 2 Pin 2 | PinSocket_1x01_P2.54mm_Vertical | J8 |
| 1 | 10kΩ | Potentiometer_ACP_CA9-H3,8_Horizontal | RV1 |
| 1 | 100kΩ | Potentiometer_ACP_CA9-H3,8_Horizontal | RV2 |
| 4 | LED | LED_D5.0mm_Clear | D1, D2, D3, D4 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D5, D6 |
| 1 | 0.1μF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 0.01μF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 4 | 10kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1, R2, R3, R4 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 1kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R5, R6, R7, R8, R9 |
| 4 | LDR03 | R_LDR_10x8.5mm_P7.6mm_Vertical | R11, R12, R13, R14 |
Solar Tracking System design files
The KiCad project lives in the Ammar-Bin-Amir/Solar_Tracking_System repository on GitHub; these links point at the commit this page was built from.
Solar Tracking System: common questions
How big is the Solar Tracking System PCB?
The Solar Tracking System measures 149.9 × 58.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Solar Tracking System?
37 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Solar Tracking System design files?
From the Ammar-Bin-Amir/Solar_Tracking_System repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Solar Tracking System design in my own project?
The repository has no license, so all rights stay with Ammar-Bin-Amir. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k