HardLabs

Archiater

anayvaidya11·Archiater·hardware/archiater-sensor-hub.kicad_pcb

Archiater PCB layout, top view — open source RP2040/RP2350 board by anayvaidya11

About the Archiater PCB

Archiater is an open source RP2040/RP2350 PCB design by anayvaidya11, published on GitHub. It is a 2-layer board measuring 77.5 × 71.8 mm, with 35 components from 22 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS, AMS1117-3.3, MAX30102, LIS3DH and BMP280. By type, the board carries 14 capacitors, 7 resistors, 6 ICs, 2 connectors, 2 switches and 1 crystal.

It belongs with the sensors designs in this gallery.

From the project

KiCad 10.0.4 design for the Archiater wrist-unit sensor hub — the custom board referenced throughout the docs. This is the real design source, committed so the "custom PCB" claim is backed by files you can open, not just a screenshot.

KiCad 10.0.4 design for the Archiater wrist-unit sensor hub — the custom board referenced throughout the docs. This is the real design source, committed so the "custom PCB" claim is backed by files you can open, not just a screenshot.

The exports/ images are generated from the source in this folder — see "Regenerating the images" below. They are the design's own tool output, not photos: no physical board exists to photograph (see status above).

Main components on the Archiater

W25Q128JVSAMS1117-3.3RP2040MAX30102LIS3DHBMP280

Archiater bill of materials (BOM)

35 components, 22 distinct parts.

QtyPartRefs
1
W25Q128JVS
U1
1
AMS1117-3.3
U2
1
RP2040
U3
1
MAX30102
U4
1
LIS3DH
U5
1
BMP280
U6
1
12MHz
Y1
1
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x03_Pin
J2
1
R2
27R1
2
SW_Push
SW1, SW2
1
LED
D1
1
1µH
L1
2
15pF
C1, C2
8
100nF
C3, C4, C5, C6, C9, C12, C13, C14
2
1µF
C7, C8
2
22µF
C10, C11
1
27R
R1
1
1K
R2
2
5.1k
R3, R4
Show 2 more
QtyPartRefs
1
330
R5
2
4.7k
R6, R7

Archiater design files

The KiCad project lives in the anayvaidya11/Archiater repository on GitHub; these links point at the commit this page was built from.

Archiater: common questions

What microcontroller does the Archiater use?

The Archiater is built around the RP2040, from the RP2040/RP2350 family.

How big is the Archiater PCB?

The Archiater measures 77.5 × 71.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Archiater?

35 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Archiater design files?

From the anayvaidya11/Archiater repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Archiater design in my own project?

The repository has no license, so all rights stay with anayvaidya11. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Archiater without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards