ECE445L Lab7
About the ECE445L Lab7 PCB
ECE445L Lab7 is an open source ESP8266 PCB design by Andres-Wearden, published on GitHub. It is a 2-layer board measuring 115 × 94 mm, with 14 components from 14 distinct parts.
Its main chip is the ESP8266-01/ESP-01, from the ESP8266 family. Other key parts include the EK-TM4C123GXL and Adafruit ST7735R. By type, the board carries 5 switches, 3 ICs, 2 capacitors, 1 transistor, 1 speaker and 1 diode.
From the project
For 319K/445L Lab 6 or 7, use the marked file. Otherwise use ECE445L_Starter.
Main components on the ECE445L Lab7
ECE445L Lab7 bill of materials (BOM)
14 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EK-TM4C123GXL Texas Instruments | ti_EKTM4C123GXL | U1 |
| 1 | Adafruit ST7735R Adafruit | adafruit_st7735r2 | U2 |
| 1 | ESP8266-01/ESP-01 SparkFun | PinHeader_2x04_P2.54mm_Vertical | U3 |
| 1 | IRLD024PBF Vishay | DIP920W60P254L490H457Q4N | Q1 |
| 1 | Speaker | PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | UP | SW_PUSH_6mm | SW1 |
| 1 | DOWN | SW_PUSH_6mm | SW2 |
| 1 | LEFT | SW_PUSH_6mm | SW3 |
| 1 | RIGHT | SW_PUSH_6mm | SW4 |
| 1 | MODE | SW_PUSH_6mm | SW5 |
| 1 | 1N914 onsemi | D_P6.35mm_Horizontal | D1 |
| 1 | 100nF | C_Axial_200mil | C1 |
| 1 | 4.7uF | CP_Radial_Tantal200mil | C2 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
ECE445L Lab7 design files
The KiCad project lives in the Andres-Wearden/Lab10 repository on GitHub; these links point at the commit this page was built from.
ECE445L Lab7: common questions
What microcontroller does the ECE445L Lab7 use?
The ECE445L Lab7 is built around the ESP8266-01/ESP-01, from the ESP8266 family.
How big is the ECE445L Lab7 PCB?
The ECE445L Lab7 measures 115 × 94 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ECE445L Lab7?
14 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the ECE445L Lab7 design files?
From the Andres-Wearden/Lab10 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ECE445L Lab7 design in my own project?
The repository has no license, so all rights stay with Andres-Wearden. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ECE445L Lab7 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in Lab10
ESP32ECE445L Lab7Restart
150 × 90 mm83 parts2LNo license0
ESP32ECE445L Starter
164.3 × 114.8 mm62 parts2LNo license0
ESP32ECE445L Operator Final
128.8 × 114.8 mm56 parts2LNo license0
ECE 319K Baseline Project
114.3 × 88.9 mm40 parts2LNo license0
ECE 445L Lab 6
114.4 × 88.9 mm28 parts2LNo license0
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398