21 open source boards using the EK-TM4C123GXL
Real designs built with the EK-TM4C123GXL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
POV-Globe
Mikail-Sadic-UT
83.6 × 86.6 mm95 parts2LNo license40FE-FEAR16v2-PCB-Mainboard
Dephrilibrium
224 × 395 mm408 parts4LGPL-3.00ESP8266
ECE 445L Baseline Project
wtc534
93.5 × 153.7 mm44 parts2LNo license0ESP8266
ECE 445L Baseline Project
Siddhant779
93.5 × 153.7 mm44 parts2LNo license0ESP32
ECE 445L Baseline Project
Ethan-Hale
152 × 110.6 mm40 parts2LNo license0ESP32
DigiPiano
maanavkoladia
152 × 110.6 mm40 parts2LNo license0ESP32
ECE445L Starter
Andres-Wearden
164.3 × 114.8 mm62 parts2LNo license0ESP32
ECE445L Operator Final
Andres-Wearden
128.8 × 114.8 mm56 parts2LNo license0ESP8266
ECE 445L Baseline Project
tanai-prathapam
115 × 94 mm16 parts2LNo license0ESP8266
ECE 445L Baseline Project
tanai-prathapam
115 × 94 mm16 parts2LNo license0ESP8266
ECE 445L Baseline Project
Joshua-Koshy
115 × 94 mm16 parts2LNo license0ESP8266
ECE 445L Baseline Project
tanai-prathapam
115 × 94 mm16 parts2LNo license0ESP8266
ECE 445L Baseline Project
DylanMeeks
115 × 94 mm16 parts2LNo license0ESP8266
ECE 445L Baseline Project
tanai-prathapam
115 × 94 mm16 parts2LNo license0ESP8266
ECE 445L Lab 7
tanai-prathapam
115 × 94 mm14 parts2LNo license0ESP8266
ECE 445L Lab 7
Joshua-Koshy
115 × 94 mm14 parts2LNo license0ESP8266
ECE 445L Lab 7
tanai-prathapam
115 × 94 mm14 parts2LNo license0ESP8266
ECE 445L Lab 7
DylanMeeks
115 × 94 mm14 parts2LNo license0ESP8266
ECE445L Lab7
Andres-Wearden
115 × 94 mm14 parts2LNo license0ESP8266
ECE 445L Lab 7
tanai-prathapam
115 × 94 mm14 parts2LNo license0ESP8266
ECE 445L Lab 7
tanai-prathapam
115 × 94 mm14 parts2LNo license0
How designs wire the EK-TM4C123GXL
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the EK-TM4C123GXL connects to, and the resistors, capacitors and other passives placed on it.
- The PD6 pin is left unconnected on 13 of 13 designs.
- The +3.3V pin is tied to 3.3V on 12 of 13 designs.
- The PE2 pin is left unconnected on 12 of 13 designs.
- The PE3 pin is left unconnected on 12 of 13 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| +3.3Vpin J1_1 | Connected to: 3.3V 92% | — |
| PB5pin J1_2 | Connected to: Not connected 69% · a signal 31% | — |
| PB0pin J1_3 | Connected to: Not connected 69% · a signal 31% | — |
| PB1pin J1_4 | Connected to: Not connected 69% · a signal 31% | — |
| PE4pin J1_5 | Connected to: Not connected 69% · a signal 31% | — |
| PE5pin J1_6 | Connected to: Not connected 69% · a signal 31% | — |
| GNDpin J2_1, J3_2 | Connected to: GND 72% · not connected 28% | — |
| PB2pin J2_2 | Connected to: Not connected 77% · a signal 23% | — |
| PE0pin J2_3 | Connected to: Not connected 77% · a signal 23% | — |
| PF0pin J2_4 | Connected to: Not connected 85% · a signal 15% | — |
| TARGETRSTpin J2_5 | Connected to: Not connected 83% · a signal 17% | — |
| PB7pin J2_6 | Connected to: Not connected 62% · a signal 38% | — |
| PB6pin J2_7 | Connected to: Not connected 69% · a signal 31% | — |
| +VBUSpin J3_1 | Connected to: 5V 92% | — |
| PD2pin J3_5 | Connected to: Not connected 77% · a signal 23% | — |
| PE1pin J3_7 | Connected to: Not connected 69% · a signal 31% | — |
| PE2pin J3_8 | Connected to: Not connected 92% | — |
| PE3pin J3_9 | Connected to: Not connected 92% | — |
| PF1pin J3_10 | Connected to: Not connected 69% · a signal 31% | — |
| PF2pin J4_1 | Connected to: Not connected 69% · a signal 31% | — |
| PF3pin J4_2 | Connected to: Not connected 62% · a signal 38% | — |
| PB3pin J4_3 | Connected to: Not connected 92% | — |
| PC4pin J4_4 | Connected to: Not connected 69% · a signal 31% | — |
| PC6pin J4_6 | Connected to: Not connected 69% · a signal 31% | — |
| PC7pin J4_7 | Connected to: Not connected 77% · a signal 23% | — |
| PD6pin J4_8 | Connected to: Not connected 100% | — |
| PD7pin J4_9 | Connected to: Not connected 85% · a signal 15% | — |
| PF4pin J4_10 | Connected to: Not connected 85% · a signal 15% | — |
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include POV-Globe by Mikail-Sadic-UT, ECE445L Lab7 by Andres-Wearden, FE-FEAR16v2-PCB-Mainboard by Dephrilibrium and ECE 445L Lab 7 by DylanMeeks.
The EK-TM4C123GXL in open source designs
The gallery holds 21 open source boards using the EK-TM4C123GXL from 13 GitHub repositories; a typical one measures about 115 × 94 mm and carries around 16 components.
95% are two-layer designs, the rest use four layers or more, and 5% carry an open source license.
The most starred is POV-Globe by Mikail-Sadic-UT.
Parts used alongside the EK-TM4C123GXL
Microcontrollers on boards using the EK-TM4C123GXL
What boards using the EK-TM4C123GXL are built for
EK-TM4C123GXL: common questions
Where can I find a EK-TM4C123GXL reference design?
Each of the 21 boards on this page is a real design using the EK-TM4C123GXL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the EK-TM4C123GXL PD6 pin connected?
The PD6 pin is left unconnected on 13 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the EK-TM4C123GXL.
How is the EK-TM4C123GXL +3.3V pin connected?
The +3.3V pin is tied to 3.3V on 12 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the EK-TM4C123GXL.
How is the EK-TM4C123GXL PE2 pin connected?
The PE2 pin is left unconnected on 12 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the EK-TM4C123GXL.
What parts are used alongside the EK-TM4C123GXL?
The ESP8266-01/ESP-01, Adafruit ST7735R, ESP8266-1, LM4041CILPR and LM2937ET-3.3/NOPB appear in the most repositories here.
Which microcontrollers do boards using the EK-TM4C123GXL use?
Most are built on ESP8266 (16) and ESP32 (4).
How big is a typical board using the EK-TM4C123GXL?
The median is 115 × 94 mm, and 95% are two-layer designs.
What is the most popular open source board using the EK-TM4C123GXL?
By GitHub stars, POV-Globe by Mikail-Sadic-UT, with 40 stars.
Can I simulate one of these boards using the EK-TM4C123GXL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.