16 open source boards using the ESP8266-01/ESP-01
Real designs built with the ESP8266-01/ESP-01, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
ESP8266-WiFiRelay-IndustrialIoT
ajvizganapathy-pixel
40 × 30 mm19 parts4LNo license1ESP8266
ECE-445L-final project
collebrusco
139.5 × 62.7 mm50 parts2LNo license0ESP8266
ECE 445L Baseline Project
wtc534
93.5 × 153.7 mm44 parts2LNo license0ESP8266
ECE 445L Baseline Project
Siddhant779
93.5 × 153.7 mm44 parts2LNo license0ESP8266
Iot sensor node
DestinyU7
68.6 × 53.3 mm19 parts2LNo license0ESP8266
Esp01s power board
idreamshen
53.3 × 33 mm15 parts2LNo license0ESP8266
Test convoyeur
TekBot-Robotics-Challenge
82.6 × 82.3 mm47 parts2LNo license0ESP8266
2026 InClass Balancing Robot
cshieldsce
157.4 × 86.9 mm55 parts2LNo license0ESP8266
ECE 445L Lab 7
Joshua-Koshy
115 × 94 mm14 parts2LNo license0ESP8266
ECE 445L Lab 7
tanai-prathapam
115 × 94 mm14 parts2LNo license0ESP8266
ECE445L Lab7
Andres-Wearden
115 × 94 mm14 parts2LNo license0ESP8266
ECE 445L Lab 7
tanai-prathapam
115 × 94 mm14 parts2LNo license0ESP8266
ECE 445L Lab 7
DylanMeeks
115 × 94 mm14 parts2LNo license0ESP8266
ECE 445L Lab 7
tanai-prathapam
115 × 94 mm14 parts2LNo license0ESP8266
ECE 445L Lab 7
tanai-prathapam
115 × 94 mm14 parts2LNo license0ESP8266
Espsense
larsimmisch
66 × 68.6 mm20 parts2LNo license0
How designs wire the ESP8266-01/ESP-01
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the ESP8266-01/ESP-01 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 78% | — |
| VCCpin 8 | Connected to: 3.3V 78% · a signal 22% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP8266-WiFiRelay-IndustrialIoT by ajvizganapathy-pixel, ECE-445L-final project by collebrusco, 2026 InClass Balancing Robot by cshieldsce and Iot sensor node pcb by DestinyU7.
The ESP8266-01/ESP-01 in open source designs
The gallery holds 16 open source boards using the ESP8266-01/ESP-01 from 16 GitHub repositories; a typical one measures about 115 × 94 mm and carries around 17 components.
94% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is ESP8266-WiFiRelay-IndustrialIoT by ajvizganapathy-pixel.
Parts used alongside the ESP8266-01/ESP-01
Microcontrollers on boards using the ESP8266-01/ESP-01
What boards using the ESP8266-01/ESP-01 are built for
ESP8266-01/ESP-01: common questions
Where can I find a ESP8266-01/ESP-01 reference design?
Each of the 16 boards on this page is a real design using the ESP8266-01/ESP-01. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ESP8266-01/ESP-01?
The EK-TM4C123GXL, Adafruit ST7735R, AMS1117-3.3, ILI_Display and LM2937xMP appear in the most repositories here.
Which microcontrollers do boards using the ESP8266-01/ESP-01 use?
Most are built on ESP8266 (16).
How big is a typical board using the ESP8266-01/ESP-01?
The median is 115 × 94 mm, and 94% are two-layer designs.
What is the most popular open source board using the ESP8266-01/ESP-01?
By GitHub stars, ESP8266-WiFiRelay-IndustrialIoT by ajvizganapathy-pixel, with 1 stars.
Can I simulate one of these boards using the ESP8266-01/ESP-01 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.