Badge-Ciberseguridad
About the Badge-Ciberseguridad PCB
Badge-Ciberseguridad is an open source ESP32 PCB design by angelisidro, published on GitHub. It is a 2-layer board measuring 80 × 107.5 mm, with 53 components from 37 distinct parts.
Its main chip is the ESP32-C6-WROOM-1U-N8, from the ESP32 family. Other key parts include the GPS, LNA and XC6220B331MR-G. By type, the board carries 16 capacitors, 10 resistors, 7 switches, 6 connectors, 4 ICs and 4 diodes.
It belongs with the wearables designs in this gallery.
Main components on the Badge-Ciberseguridad
Badge-Ciberseguridad bill of materials (BOM)
53 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GPS | GPSM-SMD_ATGM336H | U1 |
| 1 | LNA | AT2659S-LSA | U2 |
| 1 | XC6220B331MR-G | SOT-23-5 | U3 |
| 1 | ESP32-C6-WROOM-1U-N8 | MOD28_ESP32-C6-WROOM-1U_EXP | U4 |
| 1 | DMG3415U-7 | SOT-23 | Q1 |
| 1 | MMBT2222A | SOT-23 | Q2 |
| 1 | OLED | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | UART | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Battery | BAT-TH_BH-AAA-A1AJ024 | J3 |
| 1 | I2C | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Micro_SD_Card_Det1 | SUNTECH_ST-TF-003A | J5 |
| 1 | USB_C_Plug_USB2.0 | C393939 | P1 |
| 1 | Antenna_Shield | U.FL_Molex_MCRF_73412-0110_Vertical | AE1 |
| 1 | Buzzer | Buzzer4x4 | BZ1 |
| 1 | 750mA | Fuse_0603_1608Metric | F1 |
| 1 | ON | JS102011SAQN | SW1 |
| 1 | LEFT | SW_SPST_TL3342 | SW2 |
| 1 | RIGTH | SW_SPST_TL3342 | SW3 |
| 1 | DOWN | SW_SPST_TL3342 | SW4 |
| 1 | UP | SW_SPST_TL3342 | SW5 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RESET | SW_SPST_TL3342 | SW7 |
| 1 | GPIO | SW_SPST_TL3342 | SW8 |
| 2 | MBR120 | D_SOD-123F | D2, D3 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5 |
| 1 | 6.8nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 470pF | C_0603_1608Metric | C1 |
| 1 | 1uF | C_0603_1608Metric | C2 |
| 6 | 10uF | C_0603_1608Metric | C3, C4, C5, C6, C14, C16 |
| 6 | .1uF | C_0603_1608Metric | C7, C8, C9, C10, C11, C12 |
| 1 | 100nF | C_0603_1608Metric | C13 |
| 1 | 0.1uF | C_0603_1608Metric | C15 |
| 2 | 100K | R_0603_1608Metric | R1, R5 |
| 1 | 3.3K | R_0603_1608Metric | R2 |
| 2 | 10K | R_0603_1608Metric | R3, R12 |
| 1 | 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 2 | 330 | R_0603_1608Metric | R8, R9 |
| 2 | 5k1 | R_0603_1608Metric | R10, R11 |
Badge-Ciberseguridad design files
The KiCad project lives in the angelisidro/Badge-FIT-2025 repository on GitHub; these links point at the commit this page was built from.
Badge-Ciberseguridad: common questions
What microcontroller does the Badge-Ciberseguridad use?
The Badge-Ciberseguridad is built around the ESP32-C6-WROOM-1U-N8, from the ESP32 family.
How big is the Badge-Ciberseguridad PCB?
The Badge-Ciberseguridad measures 80 × 107.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Badge-Ciberseguridad?
53 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the Badge-Ciberseguridad design files?
From the angelisidro/Badge-FIT-2025 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Badge-Ciberseguridad design in my own project?
The repository has no license, so all rights stay with angelisidro. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Badge-Ciberseguridad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Badge-FIT-2025
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Racer
36 × 50.2 mm70 parts4LApache-2.03.8k