KangalBcuCircuit
anilgurses·kangalBcuCircuit
About the KangalBcuCircuit PCB
KangalBcuCircuit is an open source ESP32 PCB design by anilgurses, published on GitHub. It is a 2-layer board measuring 52.8 × 65.3 mm, with 37 components from 20 distinct parts.
Its main chip is the ESP32-WROOM, from the ESP32 family. Other key parts include the BME280, NCP1117-3.3_SOT223, CP2102N-A01-GQFN24 and ADXL345. By type, the board carries 16 capacitors, 8 resistors, 5 ICs, 2 transistors, 2 switches and 2 diodes.
Main components on the KangalBcuCircuit
KangalBcuCircuit bill of materials (BOM)
37 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U1 |
| 1 | ESP32-WROOM | ESP32-WROOM-32 | U2 |
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U3 |
| 1 | CP2102N-A01-GQFN24 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U4 |
| 1 | ADXL345 | LGA-14 | U5 |
| 2 | MMBT3904 | SOT-23 | Q1, Q2 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |
| 1 | L80-M39 | QUECTEL_L80-M39 | MODULE1 |
| 2 | SW_Push | SW_SPST_PTS645 | SW1, SW2 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | D | D_0805_2012Metric | D2 |
| 2 | 100n | C_0805_2012Metric | C1, C2 |
| 2 | 1nF | C_0805_2012Metric | C3, C4 |
| 1 | 100uF | C_0805_2012Metric | C5 |
| 5 | 0.1uF | C_0805_2012Metric | C6, C8, C9, C11, C12 |
| 4 | 10uF | C_0805_2012Metric | C7, C10, C13, C14 |
| 2 | 100nF | C_0805_2012Metric | C15, C16 |
| 2 | 4.7K | R_0805_2012Metric | R1, R2 |
| 4 | 10K | R_0805_2012Metric | R3, R4, R5, R6 |
| 2 | 100R | R_0805_2012Metric | R7, R8 |
KangalBcuCircuit design files
The KiCad project lives in the anilgurses/kangalBcuCircuit repository on GitHub; these links point at the commit this page was built from.
- Layoutkangal-bcu.kicad_pcb
KangalBcuCircuit: common questions
What microcontroller does the KangalBcuCircuit use?
The KangalBcuCircuit is built around the ESP32-WROOM, from the ESP32 family.
How big is the KangalBcuCircuit PCB?
The KangalBcuCircuit measures 52.8 × 65.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the KangalBcuCircuit?
37 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the KangalBcuCircuit design files?
From the anilgurses/kangalBcuCircuit repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the KangalBcuCircuit design in my own project?
The repository has no license, so all rights stay with anilgurses. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the KangalBcuCircuit without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k