Starbie pcb-HLW1

annejade11·starbie-pcb-HLW1

Starbie pcb-HLW1 layout, top view — open source ESP32 board by annejade11

About the Starbie pcb-HLW1

Starbie pcb-HLW1 is an open source ESP32 PCB design by annejade11, published on GitHub. It is a 2-layer board measuring 77.5 × 49.5 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

Building a pcb for Half Life Week 1 using the starbie tutorial.

In this project, I used the pre-existing Starbie tutorial repo by SharKingStudios to make my own "Cheesie" PCB build for week one of the Half Life challenge.

Before this project, I had never worked with PCBs or physical hardware before, but it's something I've been meaning to get into for a long time as I started coding a bit over a year ago. Ever since I started coding and 3D printing things on printers at my school, I just thought it would be so cool to be able to code my own product, then put it together in hardware and print a beautiful design for it. The concept of being my own little…

Starbie pcb-HLW1, from the project README
From the project README

Main components on the Starbie pcb-HLW1

Starbie pcb-HLW1 bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DHT11
U1
1
XIAO-ESP32-C3-SMD
U2
1
CONN_01X04_PIN
Conn_01x04_Pin
J1
1
CONN_01X08_PIN
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10K
10k
R1

Starbie pcb-HLW1 design files

The KiCad project lives in the annejade11/starbie-pcb-HLW1 repository on GitHub; these links point at the commit this page was built from.

Starbie pcb-HLW1: common questions

What microcontroller does the Starbie pcb-HLW1 use?

The Starbie pcb-HLW1 is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie pcb-HLW1?

The Starbie pcb-HLW1 measures 77.5 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie pcb-HLW1?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Starbie pcb-HLW1 design files?

From the annejade11/starbie-pcb-HLW1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Starbie pcb-HLW1 design in my own project?

The repository has no license, so all rights stay with annejade11. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Starbie pcb-HLW1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards