Home-Automation
ANSHUMANDOCX·Home-Automation·PCB/Home Automation.kicad_pcb
About the Home-Automation PCB
Home-Automation is an open source ESP32 PCB design by ANSHUMANDOCX, published on GitHub. It is a 2-layer board measuring 110 × 120 mm, with 119 components from 34 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the PC817, BME280 and MIC5219-3.3YM5. By type, the board carries 38 resistors, 20 capacitors, 15 diodes, 14 connectors, 10 ICs and 8 transistors.
It belongs with the sensors and usb & debug tools designs in this gallery.
From the project
Its a Sever based 6 channel Home automation module + Temperature and humidity sensor made using esp32 s3
demo link https://drive.google.com/file/d/14zfI7igBqzAfgmiqQ8RciHNbKA9al0T5/view?usp=sharing
Main components on the Home-Automation
Home-Automation bill of materials (BOM)
119 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | ~ HI-LINK(海凌科) | PWRM-TH_HLK-20MXX | U2 |
| 6 | PC817 | DIP-4_W7.62mm | U3, U4, U5, U6, U7, U8 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U9 |
| 1 | MIC5219-3.3YM5 | SOT-23-5 | U11 |
| 2 | SS8050 | SOT-23 | Q3, Q4 |
| 6 | BC847 | SOT-23 | Q6, Q7, Q8, Q9, Q10, Q11 |
| 6 | ~ DORABO(地博电气) | CONN-TH_3P-P5.08_DIBO_DB128V-5.08-3P-X | CN1, CN2, CN3, CN4, CN5, CN6 |
| 1 | S1 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 3 | S2 | PinHeader_1x02_P2.54mm_Vertical | J2, J5, J6 |
| 1 | S3 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | S4 | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | FTDI Pins | PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | AC IN | TerminalBlock_CUI_TB007-508-02_1x02_P5.08mm_Horizontal | J8 |
| 6 | ~ 松乐 | RELAY-TH_SRD-XXVDC-XL-C | RLY1, RLY2, RLY3, RLY4, RLY5, RLY6 |
| 6 | ~ SHOU HAN(首韩) | SW-TH_4P-L6.0-W6.0-P4.50-LS6.5 | SW1, SW4, SW5, SW6, SW7, SW8 |
| 2 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW2, SW3 |
| 6 | 1N4007 | D_SMA | D1, D2, D3, D4, D5, D6 |
| 7 | LED | LED_0805_2012Metric | D7, D8, D9, D10, D11, D12, D14 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D13 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | SMB_L4.6-W3.6-LS5.3-RD | D16 |
| 1 | 1UF 1uF | C_0603_1608Metric | C1 |
| 14 | 0.1UF 0.1uF | C_0603_1608Metric | C2, C3, C4, C6, C7, C8, C9, C12 +6 |
| 1 | 22UF 22uF | C_0603_1608Metric | C5 |
| 1 | 10UF 10uf | C_0603_1608Metric | C10 |
| 1 | 100NF 100nf | C_0603_1608Metric | C11 |
| 2 | 4.7UF 4.7uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17, C19 |
| 12 | 220R | R_0603_1608Metric | R1, R3, R6, R7, R10, R11, R14, R15 +4 |
| 6 | 1K | R_0603_1608Metric | R2, R8, R12, R16, R20, R24 |
| 6 | DNP | R_0603_1608Metric | R4, R5, R9, R13, R17, R21 |
| 2 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25, R26 |
| 9 | 10K | R_0603_1608Metric | R27, R28, R31, R33, R34, R35, R36, R37 +1 |
| 1 | 430pF@1kHz KNSCHA(科尼盛) | RES-TH_L16.0-W5.2-P7.50-D0.8-S4.20 | R29 |
| 2 | 4.7K | R_0603_1608Metric | R30, R32 |
Home-Automation design files
The KiCad project lives in the ANSHUMANDOCX/Home-Automation repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Home Automation.kicad_pcb
- SchematicPCB/Home Automation.kicad_sch
- BOMPCB/bom.csv
Home-Automation: common questions
What microcontroller does the Home-Automation use?
The Home-Automation is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Home-Automation PCB?
The Home-Automation measures 110 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Home-Automation?
119 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Home-Automation design files?
From the ANSHUMANDOCX/Home-Automation repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Home-Automation design in my own project?
The repository has no license, so all rights stay with ANSHUMANDOCX. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Home-Automation without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k