HardLabs

Seekink-E-paper-HAT-for-Rpi

ANSHUMANDOCX·Seekink-E-paper-HAT-for-Rpi·PCB/RPI HAT.kicad_pcb

Seekink-E-paper-HAT-for-Rpi layout, top view — open source Raspberry Pi board by ANSHUMANDOCX

About the Seekink-E-paper-HAT-for-Rpi

Seekink-E-paper-HAT-for-Rpi is an open source Raspberry Pi PCB design by ANSHUMANDOCX, published on GitHub. It is a 2-layer board measuring 65 × 32.2 mm, with 36 components from 22 distinct parts.

Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. Other key parts include the TXB0108PW and RT9193-33. By type, the board carries 16 capacitors, 7 resistors, 3 transistors, 3 connectors, 3 diodes and 2 ICs.

It belongs with the displays & leds and dev boards & breakouts designs in this gallery.

From the project

This a HAT for a epaper display for SEEKINK displays with raspberry pi

It can be programmed using the GxEPD2 Library ## PCB

Seekink-E-paper-HAT-for-Rpi, from the project README
From the project README

Main components on the Seekink-E-paper-HAT-for-Rpi

TXB0108PWRT9193-33

Seekink-E-paper-HAT-for-Rpi bill of materials (BOM)

36 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TXB0108PW
U1
1
RT9193-33
U3
1
BSS138LT1G
Q1
1
AO3401A
Q2
1
SS8050
Q3
1
Conn_01x09_Pin
J1
1
Raspberry_Pi_2_3
J2
1
Conn_01x24
J3
1
SW_SPDT
SW1
3
MBR0530
D1, D2, D4
1
10uH
L1
1
104
C1
11
1UF
C2, C4, C5, C7, C8, C9, C10, C11 +3
2
4.7uF
C3, C6
1
10uF
C20
1
22nF
C21
1
0.47R
R1
1
3R
R2
1
NC/47K
R3
1
100k
R4
Show 2 more
QtyPartRefs
2
10K
R5, R9
1
47k
R6

Seekink-E-paper-HAT-for-Rpi design files

The KiCad project lives in the ANSHUMANDOCX/Seekink-E-paper-HAT-for-Rpi repository on GitHub; these links point at the commit this page was built from.

Seekink-E-paper-HAT-for-Rpi: common questions

What microcontroller does the Seekink-E-paper-HAT-for-Rpi use?

The Seekink-E-paper-HAT-for-Rpi is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.

How big is the Seekink-E-paper-HAT-for-Rpi?

The Seekink-E-paper-HAT-for-Rpi measures 65 × 32.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Seekink-E-paper-HAT-for-Rpi?

36 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Seekink-E-paper-HAT-for-Rpi design files?

From the ANSHUMANDOCX/Seekink-E-paper-HAT-for-Rpi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Seekink-E-paper-HAT-for-Rpi design in my own project?

The repository has no license, so all rights stay with ANSHUMANDOCX. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Seekink-E-paper-HAT-for-Rpi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards