6 open source boards using the RT9193-33
Real designs built with the RT9193-33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
OpenWheel
xlazam01
26.9 × 35.3 mm57 parts2LGPL-3.01STM32
Zero star
Auodit
38 × 38 mm127 parts4LCC-BY-SA-4.00ESP32
Desk-Display
ANSHUMANDOCX
33.2 × 40 mm63 parts2LNo license0Raspberry Pi
Seekink-E-paper-HAT-for-Rpi
ANSHUMANDOCX
65 × 32.2 mm36 parts2LNo license0Epd1.54inch
langpie
31.7 × 31.4 mm37 parts2LNo license48STM32
Zero star rounded
Auodit
38 × 38 mm110 parts4LCC-BY-SA-4.00
How designs wire the RT9193-33
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the RT9193-33 connects to, and the resistors, capacitors and other passives placed on it.
- The BP pin has a capacitor to GND on 4 of 4 designs, most often 22 nF.
- The IN pin is tied to VCC on 3 of 5 designs.
- The EN pin is tied to 5V on 3 of 5 designs (a signal on 2).
- The OUT pin has a inductor on 2 of 4 designs, most often 10 µH.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: VCC 60% · GND 20% · a signal 20% | — |
| GNDpin 2 | Connected to: GND 80% · 3.3V 20% | — |
| ENpin 3 | Connected to: 5V 60% · a signal 40% | — |
| BPpin 4 | Connected to: Signal 100% |
|
| OUTpin 5 | Connected to: 3.3V 50% · a signal 50% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Epd1.54inch by langpie, OpenWheel by xlazam01, Desk-Display by ANSHUMANDOCX and Seekink-E-paper-HAT-for-Rpi by ANSHUMANDOCX.
The RT9193-33 in open source designs
The gallery holds 6 open source boards using the RT9193-33 from 5 GitHub repositories; a typical one measures about 35.6 × 36.6 mm and carries around 60 components.
67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Epd1.54inch by langpie.
Microcontrollers on boards using the RT9193-33
What boards using the RT9193-33 are built for
RT9193-33: common questions
Where can I find a RT9193-33 reference design?
Each of the 6 boards on this page is a real design using the RT9193-33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the RT9193-33 BP pin connected?
The BP pin has a capacitor to GND on 4 of 4 designs, most often 22 nF. Counted from the KiCad layouts of 5 open source designs using the RT9193-33.
How is the RT9193-33 IN pin connected?
The IN pin is tied to VCC on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RT9193-33.
How is the RT9193-33 EN pin connected?
The EN pin is tied to 5V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the RT9193-33.
Which microcontrollers do boards using the RT9193-33 use?
Most are built on STM32 (3), ESP32 (1) and Raspberry Pi (1).
How big is a typical board using the RT9193-33?
The median is 35.6 × 36.6 mm, and 67% are two-layer designs.
What is the most popular open source board using the RT9193-33?
By GitHub stars, Epd1.54inch by langpie, with 48 stars.
Can I simulate one of these boards using the RT9193-33 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.