HardLabs

Teensy display shield

AnthonyDiGirolamo·teensy-display-shield·hardware/v0/TeensyDisplayShield.kicad_pcb

Teensy display shield layout, top view — open source NXP board by AnthonyDiGirolamo

About the Teensy display shield

Teensy display shield is an open source NXP PCB design by AnthonyDiGirolamo, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 179.3 × 66 mm, with 50 components from 29 distinct parts.

Its main chip is the TEENSY4.1, from the NXP family. Other key parts include the TP4054, FP6291LR-G1, Adafruit_Feather_Generic and ARDUINO_UNO_R2. By type, the board carries 11 switches, 10 resistors, 9 capacitors, 8 connectors, 3 ICs and 3 diodes.

It belongs with the displays & leds and dev boards & breakouts designs in this gallery.

Main components on the Teensy display shield

TP4054TEENSY4.1FP6291LR-G1Adafruit_Feather_GenericARDUINO_UNO_R2

Teensy display shield bill of materials (BOM)

50 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TP4054
U1
1
TEENSY4.1
Teensy4.1
U2
1
FP6291LR-G1
U3
1
Adafruit_Feather_Generic
A1
1
ARDUINO_UNO_R2
Arduino_UNO_R2
A2
2
DMG3415UQ
Q1, Q2
1
JSTPH
J1
1
USB_A
J2
1
Serial Breakouts
J3
1
I2C1 Breakout
J4
1
VBAT/5v Breakout Header
J5
1
VBUS Breakout Header
J6
2
CONN_02X05_TOP_BOTTOM
Conn_02x05_Top_Bottom
J7, J8
1
COIN_CELL_2032
Coin_Cell_2032
BT1
1
Battery Switch
SW1
10
SW_Push
SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +2
1
C2286
LED-RED
D1
2
B5819W
D2, D3
1
3.3UH
3.3uH
L1
6
10UF
10uF
C1, C2, C4, C5, C6, C7
Show 9 more
QtyPartRefs
3
100NF
100nF
C3, C8, C9
1
1k
R1
1
2k
R2
2
100K
100k
R3, R8
1
10K
10k
R4
1
120K
120k
R5
1
12K
12k
R6
1
330K
330k
R7
2
10M
R9, R10

Teensy display shield design files

The KiCad project lives in the AnthonyDiGirolamo/teensy-display-shield repository on GitHub; these links point at the commit this page was built from.

Teensy display shield: common questions

What microcontroller does the Teensy display shield use?

The Teensy display shield is built around the TEENSY4.1, from the NXP family.

How big is the Teensy display shield?

The Teensy display shield measures 179.3 × 66 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Teensy display shield?

50 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Teensy display shield design files?

From the AnthonyDiGirolamo/teensy-display-shield repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Teensy display shield design in my own project?

Yes, under the terms of its Apache-2.0 license, which AnthonyDiGirolamo chose for the repository.

Can I test firmware for the Teensy display shield without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

Similar boards