Entropy chess
AnujShah06·entropy-chess·chess_PCB/chess_PCB.kicad_pcb
About the Entropy chess PCB
Entropy chess is an open source ESP32 PCB design by AnujShah06, published on GitHub. It is a 2-layer board measuring 95 × 60 mm, with 67 components from 41 distinct parts.
Its main chip is the ESP32-S3-WROOM-2-N16R8, from the ESP32 family. Other key parts include the MCP73832T-2ACI/OT, BQ25570RGRR, XC6220B331MR-G, MAX17048G+T10 and USBLC6-2SC6. By type, the board carries 24 capacitors, 23 resistors, 7 diodes, 6 ICs, 5 connectors and 1 transistor.
Main components on the Entropy chess
Entropy chess bill of materials (BOM)
67 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-2-N16R8 | ESP32-S3-WROOM-1 | U1 |
| 1 | MCP73832T-2ACI/OT | SOT-23-5 | U2 |
| 1 | BQ25570RGRR | QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm | U3 |
| 1 | XC6220B331MR-G | SOT-23-5 | U4 |
| 1 | MAX17048G+T10 | SOT-23-6 | U5 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U6 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | USB-C 16P SMD | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | JST-PH 2P SMD | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | FPC 24P 0.5mm | Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J3 |
| 1 | Solar Cell Pads | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | ERM Motor Pads | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | BAT54S | SOT-23 | D1 |
| 1 | 1N4148W | D_SOD-123 | D2 |
| 2 | Red | LED_0402_1005Metric | D3, D4 |
| 1 | Yellow | LED_0402_1005Metric | D5 |
| 2 | Green | LED_0402_1005Metric | D6, D7 |
| 1 | 22uH | L_0603_1608Metric | L1 |
| 4 | 100nF | C_0402_1005Metric | C1, C2, C3, C17 |
| 3 | 10uF | C_0805_2012Metric | C4, C6, C13 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100uF | C_1210_3225Metric | C5 |
| 4 | 4.7uF | C_0603_1608Metric | C7, C8, C9, C12 |
| 1 | 10nF | C_0402_1005Metric | C10 |
| 1 | 22uF | C_0805_2012Metric | C11 |
| 3 | 1uF | C_0402_1005Metric | C14, C15, C16 |
| 7 | 1uF | C_0603_1608Metric | C18, C19, C20, C21, C22, C23, C24 |
| 1 | 2k | R_0402_1005Metric | R1 |
| 2 | 10k | R_0402_1005Metric | R2, R23 |
| 2 | 5.1k | R_0402_1005Metric | R3, R4 |
| 5 | 1k | R_0402_1005Metric | R5, R6, R7, R8, R9 |
| 2 | 4.7k | R_0402_1005Metric | R10, R11 |
| 1 | 5.49M | R_0402_1005Metric | R12 |
| 1 | 3.39M | R_0402_1005Metric | R13 |
| 1 | 5.65M | R_0402_1005Metric | R14 |
| 1 | 4.42M | R_0402_1005Metric | R15 |
| 1 | 5.07M | R_0402_1005Metric | R16 |
| 1 | 3.69M | R_0402_1005Metric | R17 |
| 1 | 6.04M | R_0402_1005Metric | R18 |
| 1 | 7.50M | R_0402_1005Metric | R19 |
| 1 | 3.32M | R_0402_1005Metric | R20 |
| 2 | 10M | R_0402_1005Metric | R21, R22 |
Entropy chess design files
The KiCad project lives in the AnujShah06/entropy-chess repository on GitHub; these links point at the commit this page was built from.
- Layoutchess_PCB/chess_PCB.kicad_pcb
- Schematicchess_PCB/chess_PCB.kicad_sch
Entropy chess: common questions
What microcontroller does the Entropy chess use?
The Entropy chess is built around the ESP32-S3-WROOM-2-N16R8, from the ESP32 family.
How big is the Entropy chess PCB?
The Entropy chess measures 95 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Entropy chess?
67 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the Entropy chess design files?
From the AnujShah06/entropy-chess repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Entropy chess design in my own project?
The repository has no license, so all rights stay with AnujShah06. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Entropy chess without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k