9 open source boards using the MCP73832T-2ACI/OT

Real designs built with the MCP73832T-2ACI/OT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the MCP73832T-2ACI/OT

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MCP73832T-2ACI/OT connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT pin has a decoupling capacitor on 4 of 6 designs, most often 4.7 µF (then 10 µF).
  • The VIN pin has a decoupling capacitor on 4 of 6 designs, most often 4.7 µF (then 10 µF).
  • The PROG pin has a resistor to GND on 4 of 6 designs, most often 2 kΩ (then 6.8 kΩ).
STATpin 1Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 2 kΩ (1), 10 kΩ (1)
VSSpin 2Connected to: GND 83% · not connected 17%
VBATpin 3Connected to: VBAT 50% · GND 17% · a signal 33%
  • Decoupling capacitor on 67% · 4.7 µF (3), 10 µF (1)
VINpin 4Connected to: VBUS 83% · a signal 17%
  • Decoupling capacitor on 67% · 4.7 µF (3), 10 µF (1)
PROGpin 5Connected to: Signal 100%
  • Resistor to GND on 67% · 2 kΩ (3), 6.8 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 2key by ahtn, DC801 Badge - BM by DC801, Saintcon2019 by compukidmike and Entropy chess by AnujShah06.

The MCP73832T-2ACI/OT in open source designs

The gallery holds 9 open source boards using the MCP73832T-2ACI/OT from 6 GitHub repositories; a typical one measures about 36.5 × 52.5 mm and carries around 67 components.

89% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Gamma split by ahtn.

Parts used alongside the MCP73832T-2ACI/OT

Microcontrollers on boards using the MCP73832T-2ACI/OT

What boards using the MCP73832T-2ACI/OT are built for

MCP73832T-2ACI/OT: common questions

Where can I find a MCP73832T-2ACI/OT reference design?

Each of the 9 boards on this page is a real design using the MCP73832T-2ACI/OT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MCP73832T-2ACI/OT VBAT pin?

The VBAT pin has a decoupling capacitor on 4 of 6 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the MCP73832T-2ACI/OT.

What decoupling capacitors do designs use on the MCP73832T-2ACI/OT VIN pin?

The VIN pin has a decoupling capacitor on 4 of 6 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the MCP73832T-2ACI/OT.

What resistor goes on the MCP73832T-2ACI/OT PROG pin?

The PROG pin has a resistor to GND on 4 of 6 designs, most often 2 kΩ (then 6.8 kΩ). Counted from the KiCad layouts of 6 open source designs using the MCP73832T-2ACI/OT.

Which microcontrollers do boards using the MCP73832T-2ACI/OT use?

Most are built on ESP32 (2), Nordic nRF (2), Silicon Labs (2) and AVR/Arduino (1).

How big is a typical board using the MCP73832T-2ACI/OT?

The median is 36.5 × 52.5 mm, and 89% are two-layer designs.

What is the most popular open source board using the MCP73832T-2ACI/OT?

By GitHub stars, Gamma split by ahtn, with 96 stars.

Can I simulate one of these boards using the MCP73832T-2ACI/OT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part