HalfLifeWeek1
AnvithPothula·HalfLifeWeek1-PCB·KiCad/HalfLifeWeek1.kicad_pcb
About the HalfLifeWeek1 PCB
HalfLifeWeek1 is an open source ESP32 PCB design by AnvithPothula, published on GitHub. It is a 2-layer board measuring 102.5 × 76 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the keyboards designs in this gallery.
From the project
Starbie guide: https://github.com/SharKingStudios/Starbie/blob/main/Week%201%20Guide.md
Starbie guide: https://github.com/SharKingStudios/Starbie/blob/main/Week%201%20Guide.md
I made the Starbie, and I followed the guide to create it. The guide was very helpful and provided step-by-step instructions on how to build the Starbie. I was able to complete the project successfully and learned a lot in the process. Additionally, to add my own personal touch, I replaced the shaking to do the animations with gestures instead. I did this by training a model to recognize specific gestures (I used my phone to collect the data, since I don't have the Starbie currently). I then used this…

Main components on the HalfLifeWeek1
HalfLifeWeek1 bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-SMD | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
HalfLifeWeek1 design files
The KiCad project lives in the AnvithPothula/HalfLifeWeek1-PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCad/HalfLifeWeek1.kicad_pcb
- SchematicKiCad/HalfLifeWeek1.kicad_sch
HalfLifeWeek1: common questions
What microcontroller does the HalfLifeWeek1 use?
The HalfLifeWeek1 is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the HalfLifeWeek1 PCB?
The HalfLifeWeek1 measures 102.5 × 76 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HalfLifeWeek1?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the HalfLifeWeek1 design files?
From the AnvithPothula/HalfLifeWeek1-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the HalfLifeWeek1 design in my own project?
The repository has no license, so all rights stay with AnvithPothula. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the HalfLifeWeek1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in HalfLifeWeek1-PCB
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k