Starbie

AnvithPothula·HalfLifeWeek1-PCB·Week 1 Instructions/PCB/Starbie.kicad_pcb

Starbie PCB layout, top view — open source ESP32 board by AnvithPothula

About the Starbie PCB

Starbie is an open source ESP32 PCB design by AnvithPothula, published on GitHub. It is a 2-layer board measuring 96.6 × 82.8 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the keyboards designs in this gallery.

From the project

Starbie guide: https://github.com/SharKingStudios/Starbie/blob/main/Week%201%20Guide.md

Starbie guide: https://github.com/SharKingStudios/Starbie/blob/main/Week%201%20Guide.md

I made the Starbie, and I followed the guide to create it. The guide was very helpful and provided step-by-step instructions on how to build the Starbie. I was able to complete the project successfully and learned a lot in the process. Additionally, to add my own personal touch, I replaced the shaking to do the animations with gestures instead. I did this by training a model to recognize specific gestures (I used my phone to collect the data, since I don't have the Starbie currently). I then used this…

Starbie, from the project README
From the project README

Main components on the Starbie

Starbie bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
DHT11
U1
1
XIAO-ESP32-C3-SMD
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10k
R1

Starbie design files

The KiCad project lives in the AnvithPothula/HalfLifeWeek1-PCB repository on GitHub; these links point at the commit this page was built from.

Starbie: common questions

What microcontroller does the Starbie use?

The Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie PCB?

The Starbie measures 96.6 × 82.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Starbie design files?

From the AnvithPothula/HalfLifeWeek1-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Starbie design in my own project?

The repository has no license, so all rights stay with AnvithPothula. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Starbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in HalfLifeWeek1-PCB

Similar boards