OpenScent
anxndsgn·OpenScent·kicad file/OpenScent/OpenScent.kicad_pcb
About the OpenScent PCB
OpenScent is an open source RP2040/RP2350 PCB design by anxndsgn, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 54 × 30 mm, with 57 components from 20 distinct parts.
Its main chip is the ESP32-PICO-D4, from the RP2040/RP2350 family. Other key parts include the CH343P, AMS1117 and MCP73831T-2ATI/OT. By type, the board carries 22 capacitors, 10 resistors, 6 transistors, 6 connectors, 4 ICs and 4 inductors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
an olfactory interface development board

Main components on the OpenScent
OpenScent bill of materials (BOM)
57 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-PICO-D4 | QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm | U1 |
| 1 | CH343P | QFN-16-1EP_3x3mm_P0.5mm_EP1.9x1.9mm | U2 |
| 1 | AMS1117 | SOT-89-3 | U3 |
| 1 | MCP73831T-2ATI/OT | SOT-23-5 | U4 |
| 4 | AO3400A | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | BC847BS | SOT-363_SC-70-6 | Q5 |
| 1 | DMG3415U | SOT-23 | Q6 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 5 | CONN_01X02_PIN Conn_01x02_Pin | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2, J3, J4, J5, J6 |
| 1 | YC0010AA | XCVR_YC0010AA | E1 |
| 1 | ~ | SW_TL3365AF180QG | KEY1 |
| 1 | 1N5819WS | D_SOD-323 | D1 |
| 2 | LED | LED_0603_1608Metric | D2, D3 |
| 4 | 25UH/800UH | 3 pin inductor | L1, L2, L3, L4 |
| 2 | 10UF 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 18 | 0.1UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C6, C7, C8, C9, C10, C11, C12 +10 |
| 2 | 4.7UF 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 1 | 4.7K | R_0603_1608Metric | R1 |
| 2 | 1K | R_0603_1608Metric | R2, R9 |
| 7 | 10K | R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R10 |
OpenScent design files
The KiCad project lives in the anxndsgn/OpenScent repository on GitHub; these links point at the commit this page was built from.
OpenScent: common questions
What microcontroller does the OpenScent use?
The OpenScent is built around the ESP32-PICO-D4, from the RP2040/RP2350 family.
How big is the OpenScent PCB?
The OpenScent measures 54 × 30 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the OpenScent?
57 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OpenScent design files?
From the anxndsgn/OpenScent repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OpenScent design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the OpenScent without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k