22 open source boards using the MCP73831T-2ATI/OT
Real designs built with the MCP73831T-2ATI/OT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Yatchy
Szybet
33.8 × 38 mm89 parts4LNo license180Nordic nRF
Locus
Nieko27
40 × 40 mm50 parts4LCERN-OHL-S-2.060RP2040/RP2350
Audcalc
jonbro
65 × 100 mm214 parts4LMIT59OpenHAK Hardware
OpenHAK
38.1 × 25.4 mm47 parts4LMIT56915MHzEdisonExplorer
EnhancedRadioDevices
30.5 × 53.9 mm76 parts2LNo license26ESP32
Soldered-Inkplate-2-hardware design
SolderedElectronics
65.2 × 35.2 mm97 parts4LTAPR-OHL-1.013ESP32
Nebula
Thecactusman0
39.7 × 39.9 mm59 parts2LNo license4ESP32
Bwlc1a
teapotlaboratories
80.5 × 50 mm155 parts4LMIT2ESP32
Remote
EwoudVV
27.9 × 66.1 mm12 parts2LNo license2Nordic nRF
Backup
kitsunekeyboards
285 × 94.6 mm143 parts2LMIT1RP2040/RP2350
Audcalc
sinitsinmike
65 × 100 mm214 parts4LMIT0RP2040/RP2350
Audcalc
sinitsinmike
65 × 100 mm214 parts4LMIT0ESP32
GNSS-viewwer
hnz1102
100 × 50.1 mm68 parts4LNo license0ESP32
GNSS-viewer
hnz1102
100 × 50.1 mm68 parts4LNo license0RP2040/RP2350
OpenScent
anxndsgn
54 × 30 mm57 parts4LCC-BY-NC-4.00ESP32
ESP32-H2-Matter-Button
Tee6
32 × 32 mm54 parts4LNo license0Nordic nRF
Multi-NFC
PrinceYadav78
58 × 95 mm43 parts4LMIT0AVR/Arduino
CatWANGrrrove
ElectronicCats
40 × 50 mm41 parts2LMIT0Contapassi-V1
daniele-boerio
24 × 41 mm27 parts4LNo license0ESP32
Primis FaceTracker
Nieko27
95 × 48 mm44 parts2LCERN-OHL-S-2.060Nordic nRF
Laptreus v2.0-right usb
kitsunekeyboards
285 × 94.6 mm143 parts2LMIT1OHAK 131
biomurph
38.1 × 25.4 mm48 parts4LNo license1
How designs wire the MCP73831T-2ATI/OT
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the MCP73831T-2ATI/OT connects to, and the resistors, capacitors and other passives placed on it.
- The PROG pin has a resistor to GND on 20 of 20 designs, most often 10 kΩ (then 2 kΩ).
- The VBAT pin has a decoupling capacitor on 15 of 20 designs, most often 4.7 µF (then 10 µF).
- The VDD pin has a decoupling capacitor on 10 of 20 designs, most often 4.7 µF (then 100 nF).
- The STAT pin has a series resistor on 9 of 20 designs, most often 1 kΩ (then 470 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| STATpin 1 | Connected to: Signal 100% |
|
| VSSpin 2 | Connected to: GND 100% | — |
| VBATpin 3 | Connected to: BATT 80% · a signal 20% |
|
| VDDpin 4 | Connected to: VBUS 75% · a signal 25% |
|
| PROGpin 5 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Yatchy by Szybet, Locus by Nieko27, Audcalc by jonbro and OpenHAK Hardware by OpenHAK.
The MCP73831T-2ATI/OT in open source designs
The gallery holds 22 open source boards using the MCP73831T-2ATI/OT from 20 GitHub repositories; a typical one measures about 56 × 50 mm and carries around 64 components.
68% use four copper layers or more, and 55% carry an open source license.
The most starred is Yatchy by Szybet.
Parts used alongside the MCP73831T-2ATI/OT
Microcontrollers on boards using the MCP73831T-2ATI/OT
What boards using the MCP73831T-2ATI/OT are built for
MCP73831T-2ATI/OT: common questions
Where can I find a MCP73831T-2ATI/OT reference design?
Each of the 22 boards on this page is a real design using the MCP73831T-2ATI/OT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MCP73831T-2ATI/OT PROG pin?
The PROG pin has a resistor to GND on 20 of 20 designs, most often 10 kΩ (then 2 kΩ). Counted from the KiCad layouts of 20 open source designs using the MCP73831T-2ATI/OT.
What decoupling capacitors do designs use on the MCP73831T-2ATI/OT VBAT pin?
The VBAT pin has a decoupling capacitor on 15 of 20 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 20 open source designs using the MCP73831T-2ATI/OT.
What decoupling capacitors do designs use on the MCP73831T-2ATI/OT VDD pin?
The VDD pin has a decoupling capacitor on 10 of 20 designs, most often 4.7 µF (then 100 nF). Counted from the KiCad layouts of 20 open source designs using the MCP73831T-2ATI/OT.
What parts are used alongside the MCP73831T-2ATI/OT?
The HCPL-0631, LM4040DBZ-2.5, ME6211C, RP2040 and TLV320AIC3204 appear in the most repositories here.
Which microcontrollers do boards using the MCP73831T-2ATI/OT use?
Most are built on ESP32 (9), Nordic nRF (4), RP2040/RP2350 (4) and AVR/Arduino (1).
How big is a typical board using the MCP73831T-2ATI/OT?
The median is 56 × 50 mm, and 32% are two-layer designs.
What is the most popular open source board using the MCP73831T-2ATI/OT?
By GitHub stars, Yatchy by Szybet, with 180 stars.
Can I simulate one of these boards using the MCP73831T-2ATI/OT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.