Game controller thing
Anycircle11139s·Game-controller-thing·game PCB/game.kicad_pcb
About the Game controller thing PCB
Game controller thing is an open source ESP32 PCB design by Anycircle11139s, published on GitHub. It is a 2-layer board measuring 92.6 × 73.3 mm, with 19 components from 12 distinct parts.
Its main chip is the XIAO-ESP32-S3-DIP, from the ESP32 family. Other key parts include the COM-09032 and ADS1115IDGS. By type, the board carries 5 switches, 5 capacitors, 4 resistors, 3 ICs, 1 connector and 1 buzzer.
From the project
STEP FILE: https://drive.google.com/file/d/1q7aepsTQnkLOloDX4E2i3pMCJ2lylLdX/view?usp=sharing
STEP FILE: https://drive.google.com/file/d/1q7aepsTQnkLOloDX4E2i3pMCJ2lylLdX/view?usp=sharing
So I just spent a really, really long time buiding a handheld game because my friend said hed let me have some golen gaytime if I designed and built a game :D
I created a custom PCB, firmware and a CAD case which I am really proud of, and I can already see how my skills and experience have increased/progressed since I started at hack club (I wouldn't be able to do this before). I am really excited about the project and I can't wait till I can build it for myself.
Main components on the Game controller thing
Game controller thing bill of materials (BOM)
19 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | COM-09032 | XDCR_COM-09032 | U1 |
| 1 | XIAO-ESP32-S3-DIP | XIAO-ESP32-S3-DIP | U2 |
| 1 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | Oled | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 4 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW6 |
| 3 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C4, C5 |
| 2 | 0.1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3 |
| 2 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 100r | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | PTA2043-2010CIB103 | TRIM_PTA2043-2010CIB103 | R4 |
Game controller thing design files
The KiCad project lives in the Anycircle11139s/Game-controller-thing repository on GitHub; these links point at the commit this page was built from.
- Layoutgame PCB/game.kicad_pcb
- Schematicgame PCB/game.kicad_sch
- BOMGame BOM.csv
Game controller thing: common questions
What microcontroller does the Game controller thing use?
The Game controller thing is built around the XIAO-ESP32-S3-DIP, from the ESP32 family.
How big is the Game controller thing PCB?
The Game controller thing measures 92.6 × 73.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Game controller thing?
19 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Game controller thing design files?
From the Anycircle11139s/Game-controller-thing repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Game controller thing design in my own project?
The repository has no license, so all rights stay with Anycircle11139s. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Game controller thing without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k