EasyTalkie
AronTheB·EasyTalkie·PCB/EasyTalkie.kicad_pcb
About the EasyTalkie PCB
EasyTalkie is an open source ESP32 PCB design by AronTheB, published on GitHub. It is a 2-layer board measuring 55 × 82 mm, with 6 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-S3-DIP, from the ESP32 family. Other key parts include the INMP441, MAX98357A and SSD1306. By type, the board carries 4 ICs and 2 switches.
Main components on the EasyTalkie
EasyTalkie bill of materials (BOM)
6 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3-DIP | XIAO-ESP32-S3-DIP | U1 |
| 1 | INMP441 | inmp441 | U2 |
| 1 | MAX98357A | MAX98357A Module | U3 |
| 1 | SSD1306 | 128x64OLED | U4 |
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1 |
| 1 | ~ | SS12D00 | SW2 |
EasyTalkie design files
The KiCad project lives in the AronTheB/EasyTalkie repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/EasyTalkie.kicad_pcb
- SchematicPCB/EasyTalkie.kicad_sch
- BOMBOM/BOM.csv
EasyTalkie: common questions
What microcontroller does the EasyTalkie use?
The EasyTalkie is built around the XIAO-ESP32-S3-DIP, from the ESP32 family.
How big is the EasyTalkie PCB?
The EasyTalkie measures 55 × 82 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EasyTalkie?
6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EasyTalkie design files?
From the AronTheB/EasyTalkie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EasyTalkie design in my own project?
The repository has no license, so all rights stay with AronTheB. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the EasyTalkie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k