OpenStreamR
ArscottT·OpenStreamR·Electronics/openstreamr.kicad_pcb
About the OpenStreamR PCB
OpenStreamR is an open source ESP32 PCB design by ArscottT, published on GitHub. It is a 4-layer board measuring 65 × 71.8 mm, with 77 components from 31 distinct parts.
Its main chip is the ESP32-WROVER-E-N4R8, from the ESP32 family. Other key parts include the ES8388, AMS1117-3.3, TSOP382xx and CP2102N-Axx-xQFN24. By type, the board carries 31 resistors, 23 capacitors, 6 ICs, 6 diodes, 5 connectors and 4 transistors.
It belongs with the audio and iot & wireless designs in this gallery.
From the project
Open Source Audio Stream Receiver
OpenStreamR is an ESP32 based Snapcast receiver.
This project is intended to be the little brother of other open source projects. It is intended as an easy way to turn any analogue input capable media device into a WIFI capable stream receiver.
Since the adapted media device will not be capable of detecting the audio stream. The streamer features an IR transmit/ receive system to be able to remotely control the media device.
Main components on the OpenStreamR
OpenStreamR bill of materials (BOM)
77 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROVER-E-N4R8 | XCVR_ESP32-WROVER-E-N4R8 | U1 |
| 1 | ES8388 | QFN-28-1EP_4x4mm_P0.45mm_EP2.6x2.6mm | U2 |
| 2 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3, U4 |
| 1 | TSOP382xx | Vishay_MINICAST-3Pin | U5 |
| 1 | CP2102N-Axx-xQFN24 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U6 |
| 1 | L2N7002SLLT1G | SOT-23-3_L3.0-W1.7-P0.95-LS2.9-BR | Q1 |
| 3 | MMBT3904LT1G | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | Q2, Q3, Q4 |
| 2 | XD-RCA-103R | CONN-TH_XD-RCA-103R | CN1, CN2 |
| 1 | Conn_01x09_Pin | PinHeader_1x09_P2.54mm_Vertical | J1 |
| 2 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J4 |
| 1 | PJ-327C-4A | AUDIO-SMD_PJ-327C-4A | Audio1 |
| 1 | TYPE-C 16PIN 2MD(073) | SMD_TYPE-C-16PIN-2MD-073 | USB1 |
| 1 | IR204A | LED_D3.0mm_IRBlack | D1 |
| 4 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D4, D5 |
| 1 | SP0503BAHT | SOT-143 | D6 |
| 1 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 10 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4, C5, C6, C7, C8, C9, C13 +2 |
| 1 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 4 | EEEFT1V101AP | CAP-SMD_BD6.3-L6.6-W6.6-FD | C10, C11, C12, C21 |
| 6 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15, C16, C18, C19, C20 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23 |
| 4 | 5.1k | R_0603_1608Metric | R1, R2, R24, R25 |
| 1 | 200R | R_0603_1608Metric | R3 |
| 6 | 10k | R_0603_1608Metric | R4, R5, R6, R7, R8, R23 |
| 2 | 4.7k | R_0603_1608Metric | R9, R10 |
| 9 | 33R | R_0603_1608Metric | R11, R12, R13, R14, R18, R19, R20, R21 +1 |
| 1 | 1k | R_0603_1608Metric | R15 |
| 1 | 22.1k | R_0603_1608Metric | R16 |
| 1 | 64.9k | R_0603_1608Metric | R17 |
| 4 | 22R | R_0603_1608Metric | R26, R27, R30, R31 |
| 2 | NP | R_0603_1608Metric | R28, R29 |
OpenStreamR design files
The KiCad project lives in the ArscottT/OpenStreamR repository on GitHub; these links point at the commit this page was built from.
OpenStreamR: common questions
What microcontroller does the OpenStreamR use?
The OpenStreamR is built around the ESP32-WROVER-E-N4R8, from the ESP32 family.
How big is the OpenStreamR PCB?
The OpenStreamR measures 65 × 71.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the OpenStreamR?
77 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the OpenStreamR design files?
From the ArscottT/OpenStreamR repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the OpenStreamR design in my own project?
The repository has no license, so all rights stay with ArscottT. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the OpenStreamR without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k