11 open source boards using the ES8388

Real designs built with the ES8388, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the ES8388

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the ES8388 connects to, and the resistors, capacitors and other passives placed on it.

  • The PVDD_3 pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 10 µF).
  • The ADCVREF pin has a capacitor to GND on 11 of 11 designs, most often 10 µF (then 100 nF).
  • The VMID_20 pin has a capacitor to GND on 11 of 11 designs, most often 100 nF (then 10 µF).
  • The DVDD_2 pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 µF).
MCLK_1pin 1Connected to: Signal 91%
  • Series resistor on 64% · 33 Ω (7)
DVDD_2pin 2Connected to: 3.3V 73% · a signal 27%
  • Decoupling capacitor on 91% · 100 nF (17), 10 µF (5), 1 µF (1)
PVDD_3pin 3Connected to: 3.3V 73% · a signal 27%
  • Decoupling capacitor on 100% · 100 nF (17), 10 µF (6), 1 µF (1)
DGND_4pin 4Connected to: GND 100%
SCLK_5pin 5Connected to: The microcontroller 36%
  • Series resistor on 55% · 33 Ω (6)
DSDIN_6pin 6Connected to: The microcontroller 36%
  • Series resistor on 45% · 33 Ω (5)
LRCK_7pin 7Connected to: The microcontroller 36%
  • Series resistor on 55% · 33 Ω (6)
ASDOUT_8pin 8Connected to: The microcontroller 36% · not connected 18%
  • Series resistor on 36% · 33 Ω (4)
NC_9pin 9Connected to: Not connected 100%
VREF_10pin 10Connected to: Signal 82% · VREF 18%
  • Capacitor to GND on 91% · 10 µF (7), 100 nF (6), 1 µF (1)
ROUT1_11pin 11Connected to: Signal 91%
  • Series capacitor on 82% · 220 µF (2), 22 µF (2), 10 nF (1)
LOUT1_12pin 12Connected to: Signal 91%
  • Series capacitor on 82% · 220 µF (2), 22 µF (2), 10 nF (1)
HPGND_13pin 13Connected to: GND 100%
ROUT2_14pin 14Connected to: Not connected 55% · a signal 45%
  • Series capacitor on 36% · 47 µF (2), 1 µF (1)
LOUT2_15pin 15Connected to: Not connected 55% · a signal 45%
  • Series capacitor on 36% · 47 µF (2), 1 µF (1)
HPVDD_16pin 16Connected to: 3.3V 64% · a signal 36%
  • Decoupling capacitor on 91% · 100 nF (14), 10 µF (8), 100 µF (2)
AVDD_17pin 17Connected to: 3.3V 73% · a signal 27%
  • Decoupling capacitor on 82% · 100 nF (12), 10 µF (8), 1 µF (1)
AGND_18pin 18Connected to: GND 100%
ADCVREFpin 19Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 µF (8), 100 nF (7), 1 µF (1)
VMID_20pin 20Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (9), 10 µF (7), 4.7 µF (2)
RIN1_23pin 23Connected to: Signal 64% · not connected 27%
  • Series capacitor on 36% · 1 µF (3), 2.2 µF (1)
LIN1_24pin 24Connected to: Signal 64% · not connected 36%
  • Series capacitor on 36% · 1 µF (3), 2.2 µF (1)
NC_25pin 25Connected to: Not connected 100%
CE_26pin 26Connected to: GND 55% · a signal 45%
  • Resistor to GND on 45% · 10 kΩ (4), 0 Ω (1)
CDATA_27pin 27Connected to: The microcontroller 45%, a connector 27%
  • Pull-up to 3.3V on 73% · 4.7 kΩ (6), 5.1 kΩ (1), 10 kΩ (1)
CCLK_28pin 28Connected to: The microcontroller 45%
  • Pull-up to 3.3V on 64% · 4.7 kΩ (6), 10 kΩ (1)
EPADpin 29Connected to: GND 100%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AGB HiFi Audio Mod by cajunpanda, LoChord by kiwifruit0, Contact Mic Board by jackshisd and GAMEBOY STM32 CART by ice-bergtech.

The ES8388 in open source designs

The gallery holds 11 open source boards using the ES8388 from 11 GitHub repositories; a typical one measures about 70 × 70 mm and carries around 76 components.

64% use four copper layers or more, and 36% carry an open source license.

The most starred is AGB HiFi Audio Mod by cajunpanda.

Microcontrollers on boards using the ES8388

ES8388: common questions

Where can I find a ES8388 reference design?

Each of the 11 boards on this page is a real design using the ES8388. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ES8388 PVDD_3 pin?

The PVDD_3 pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the ES8388.

How is the ES8388 ADCVREF pin connected?

The ADCVREF pin has a capacitor to GND on 11 of 11 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 11 open source designs using the ES8388.

How is the ES8388 VMID_20 pin connected?

The VMID_20 pin has a capacitor to GND on 11 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the ES8388.

What parts are used alongside the ES8388?

The AMS1117-3.3, CP2102N-Axx-xQFN24, MCP6002-XMC and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the ES8388 use?

Most are built on ESP32 (3), STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the ES8388?

The median is 70 × 70 mm, and 36% are two-layer designs.

What is the most popular open source board using the ES8388?

By GitHub stars, AGB HiFi Audio Mod by cajunpanda, with 26 stars.

Can I simulate one of these boards using the ES8388 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part