28 open source boards using the TSOP382xx
Real designs built with the TSOP382xx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
KbxIRBlaster
kbx81
69.9 × 66.5 mm86 parts2LCC-BY-SA-4.058TI MSP430/CC
Nsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33ESP32
ESP32 mini 8Port WLED
w4b-zero
130.1 × 62 mm25 parts2LGPL-3.016AVR/Arduino
Bkm-10rlternative
skumlos
210.8 × 74.9 mm244 parts4LNo license15ESP32
KbxLEDController-16ch
kbx81
73 × 38.1 mm71 parts2LNo license10ESP32
Black-Flipper
Broccoliux
142.1 × 143 mm206 parts4LNo license7ESP32
SUMEC MK IV
bismarx-v1
80 × 45 mm84 parts4LNo license5ESP8266
WLED PCB V2
jhns-de
95 × 40 mm32 parts2LGPL-3.04ESP32
PCB V3.1
Jonathan-0101
80 × 160 mm287 parts4LGPL-3.01ESP32
Meesho-Put-To-Light
mayoogh-flexli
400 × 40 mm98 parts2LNo license0ESP32
OpenStreamR
ArscottT
65 × 71.8 mm77 parts4LNo license0TI MSP430/CC
Nsumo hardware main
Jason-sketch729
50 × 65 mm73 parts2LNo license0ESP32
Lw6017r
ImTheSquid
80 × 66 mm62 parts2LNo license0ESP32
Claude ir
njdancer
92 × 44 mm51 parts2LNo license0ESP32
Litezero
rudranshgoel1
73.9 × 68.6 mm42 parts2LNo license0ESP32
Smart fan
ben-willis
109.3 × 80 mm34 parts2LNo license0AVR/Arduino
Spark-Night-Light
hollowmaster1496
45 × 40 mm12 parts2LNo license0Pi IR.
AndiceLabs
31.8 × 27.9 mm8 parts2LNo license0ESP32
Sumec
bismarx-v1
95 × 55 mm54 parts2LNo license5ESP32
PCB V2.2 PreAutoRoute
Jonathan-0101
80 × 161 mm286 parts4LGPL-3.01ESP32
Kicad
jacksterb1234
74.3 × 54.6 mm17 parts2LNo license0ESP32
SUMEC MK IV
bismarx-v1
80 × 45 mm84 parts4LNo license3RP2040/RP2350
Techlahoma Badge 2024
OklahomaOpenSourceHardware
43.5 × 40.5 mm68 parts2LNo license3ESP32
PCB V2.2 PreAutoRoute DimChange
Jonathan-0101
80 × 161 mm286 parts4LGPL-3.01ESP32
Sumec
bismarx-v1
95 × 55 mm54 parts2LNo license3ESP32
PCB V2.4 Backup
Jonathan-0101
80 × 161 mm286 parts4LGPL-3.01AVR/Arduino
START MODULE
bismarx-v1
18.5 × 13 mm12 parts2LNo license3AVR/Arduino
ATtiny85UnoShield555 RevA
SpatialExperienceGroup
25.4 × 76.2 mm16 parts2LMIT0
How designs wire the TSOP382xx
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the TSOP382xx connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 95% | — |
| VSpin 3 | Connected to: 3.3V 64% · a signal 36% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include KbxIRBlaster by kbx81, Nsumo hardware by artfulbytes, ESP32 mini 8Port WLED by w4b-zero and Bkm-10rlternative by skumlos.
The TSOP382xx in open source designs
The gallery holds 28 open source boards using the TSOP382xx from 22 GitHub repositories; a typical one measures about 80 × 63.5 mm and carries around 70 components.
68% are two-layer designs, the rest use four layers or more, and 32% carry an open source license.
The most starred is KbxIRBlaster by kbx81.
Parts used alongside the TSOP382xx
Microcontrollers on boards using the TSOP382xx
What boards using the TSOP382xx are built for
TSOP382xx: common questions
Where can I find a TSOP382xx reference design?
Each of the 28 boards on this page is a real design using the TSOP382xx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TSOP382xx?
The ESP32-S3-WROOM-1, AP2112K-3.3, AMS1117-3.3, USBLC6-2SC6 and C6186 appear in the most repositories here.
Which microcontrollers do boards using the TSOP382xx use?
Most are built on ESP32 (19), AVR/Arduino (4), TI MSP430/CC (2) and ESP8266 (1).
How big is a typical board using the TSOP382xx?
The median is 80 × 63.5 mm, and 68% are two-layer designs.
What is the most popular open source board using the TSOP382xx?
By GitHub stars, KbxIRBlaster by kbx81, with 58 stars.
Can I simulate one of these boards using the TSOP382xx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.